A simplified broadband coupling approach applied to chemically robust sol-gel, planar integrated optical waveguides.
نویسندگان
چکیده
A new generation waveguide spectrometer with broadband coupling capabilities has been developed. As opposed to previous devices, this attenuated total reflection (ATR) spectrometer is much simpler in design, is more chemically robust, and transmits light down to at least 400 nm. The attenuated total reflection element consists of a single-mode, planar integrated optical waveguide fabricated by dip-coating a approximately 300 nm thick, sol-gel composite layer on a glass substrate. A commercially available prism is used as the incoupler with an integral holographic diffraction grating acting as the dispersive outcoupling element. The transmission of narrow band-pass filters was used to compare the response of the waveguide spectrometer to that of a conventional transmission instrument. Spectral resolution was assessed by measuring the fwhm of various laser lines, which were found to range from 0.5 to 1.3 nm. The measured limits of detection for the waveguide spectrometer from 400 to 600 nm are 8.0 and 10.1 milliabsorbance units for TE and TM polarizations, respectively. Finally, to demonstrate the application of this technology to a molecular film confined to a solid-liquid interface, visible ATR spectra of an adsorbed submonolayer of horse heart cytochrome c were acquired. A procedure to correct the waveguide spectra for the wavelength dependence in ATR path length is described.
منابع مشابه
Technology of Optical Bragg's Gratings on Planar Waveguides for Acoustooptic Applications
The aim of the presented investigations was to develop a technique of producing Bragg's gratings on planar waveguides for their application in acoustooptic structures. Waveguides are obtained by means of the sol-gel technology and they are deposited on piezoelectric plates. The introduction of a beam of light into the structure of the waveguide is in the case of planar or strip optical systems ...
متن کاملOptical Amplification and Photosensitivity in Sol-Gel Based Waveguides
The sol-gel process has emerged as an effective route for the fabrication of optical waveguides and guided wave devices and circuits. In particular, it is possible to incorporate active dopants like neodymium, erbium, and cesium for integrated optical active devices and circuits. In this paper, a review of recent research on active devices and circuits based on sol-gel process is made. Specific...
متن کاملDevelopment of Planar Optical Waveguides using UV-Patternable Hybrid Sol-gel Coating
Ridge and buried channel waveguides were fabricated on different substrates such as SiO2-on-Si, Si, glass wafers and Printed Circuit Boards by a sol-gel processing together with a photolithography process using photopatternable hybrid sol-gel materials. Thick sol-gel films of up to 100 microns were developed using a modified sol-gel process and ridge waveguides with vertical smooth sidewalls we...
متن کاملOptical and fluorescent properties of Y2O3 sol–gel planar waveguides containing Tb3+ doped nanocrystals
Terbium doped Y2O3 planar waveguides were fabricated by sol–gel process and dip-coating using yttrium acetate as precursor. Two different doping modes were compared, i.e. introduction in the sol of dispersed Tb3+ions from dissolved Tb(NO3)3, or of nanoparticles of Tb2O3 or [Y2O3:50% Tb] from an alcoholic suspension. The chemical and nanostructural properties were analyzed by infrared spectrosco...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Analytical chemistry
دوره 74 8 شماره
صفحات -
تاریخ انتشار 2002