A Dual Digital Signal Processor VME Board For Instrumentation And Control Applications
نویسندگان
چکیده
* This work was supported by the U.S. DOE Contract No. DE-AC05-84-ER40150 Abstract A Dual Digital Signal Processing VME Board was developed for the Continuous Electron Beam Accelerator Facility (CEBAF) Beam Current Monitor (BCM) system at Jefferson Lab. It is a versatile general-purpose digital signal processing board using an open architecture, which allows for adaptation to various applications. The base design uses two independent Texas Instrument (TI) TMS320C6711, which are 900 MFLOPS floating-point digital signal processors (DSP). Applications that require a fixed point DSP can be implemented by replacing the baseline DSP with the pin-for-pin compatible TMS320C6211. The design can be manufactured with a reduced chip set without redesigning the printed circuit board. For example it can be implemented as a single-channel DSP with no analog I/O.
منابع مشابه
Current DSP Applications in Accelerator Instrumentation and RF
The Beams Division at Fermilab is applying Digital Signal Processors (DSPs) to a diverse group of control and measurement systems. This paper presents Fermilab′s use of the Analog Devices SHARC DSP on custom VXI and commercial VME cards in a variety of systems. It explores how these systems take advantage of an architecture that allows for software and hardware re-use, flexibility, and evolutio...
متن کاملThap049.pdf
* This work was supported by the U.S. DOE Contract No. DE-AC05-84-ER40150 Abstract A Dual Digital Signal Processing VME Board was developed for the Continuous Electron Beam Accelerator Facility (CEBAF) Beam Current Monitor (BCM) system at Jefferson Lab. It is a versatile general-purpose digital signal processing board using an open architecture, which allows for adaptation to various applicatio...
متن کاملطراحی و ساخت یک سیستم تشخیص خواب آلودگی راننده مبتنی بر پردازش‌گر سیگنال TMS320C5509A
Every year, many people lose their lives in road traffic accidents while driving vehicles throughout the world. Providing secure driving conditions highly reduces road traffic accidents and their associated death rates. Fatigue and drowsiness are two major causes of death in these accidents; therefore, early detection of driver drowsiness can greatly reduce such accidents. Results of NTSB inves...
متن کاملDesign and Performance of a Multichannel Multisampling Analog to Digital Converter Board for Energy Measurement
1 ABSTRACT This paper describes a VME multichannel multisampling ADC board designed for low energy physics experiments. To guarantee the maximum experimental flexibility the module is completely programmable through a Digital Signal Processor and a program register accessible via VME bus. With the frequency 40 MHz the single channel can acquire a variable number of samples of each analog input....
متن کاملA Multichannel Radiofrequency Receiver for MRI Phased Array Coils
The main goal of the project is to develop a VME standard board with two independent radiofrequency inputs. Fast 12 bits A/D converter will digitize each channel at max. rate 40 MHz. After digitalization signal will be down converted by DDC (Harris HSP-50016 Digital Down Converter) with fully programmed intermediate frequency as well as phase. Detected signal from the DDC will be send to TMS320...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- CoRR
دوره cs.AR/0111030 شماره
صفحات -
تاریخ انتشار 2001