Experience with Technique a Steady - State Heat - Transfer in a Large Wind - Tunnel
نویسنده
چکیده
The Report covers the design and development of a plant for pumping a liquid through a model so as to control its temperature, the design and manufacture of the model, and the development of the heat-flow meters used in the model and the means of calibrating them. Sample measurements of heat transfer on the model, a rhombic cone of unit aspect ratio at a Mach number of 2.45, are shown and compared with calculated values.
منابع مشابه
A FAST MESH-FREE GALERKIN METHOD FOR THE ANALYSIS OF STEADY-STATE HEAT TRANSFER
The element-free Galerkin method is employed for two-dimensional analysis of steady-state heat transfer. The unknown response of the system, i.e. temperature is approximated using the moving least squares technique. Numerical integration of governing simultaneous system of equations is performed by Gauss quadrature and new modified nodal integration techniques. Numerical examples and tests have...
متن کاملOptimization of Heat Transfer Enhancement of a Flat Plate Based on Pareto Genetic Algorithm
A quad inserted into a turbulent boundary layer of a flat plate and its effect on average heat transfer and the friction coefficient is studied. To optimize this effect, the edge sizes and distance of the quad from the flat plate are continually modified. In each case, simultaneously the heat transfer enhancement and reduction in skin friction are analyzed. For optimization, the genetic algorit...
متن کاملNumerical study of natural convection heat transfer of Al2 O3/Water nanofluid in a Γ-shaped microchannel
Finite-volume procedure is presented for solving the natural convection of the laminar nanofluid flow in a Γ shaped microchannel in this article. Modified Navier-Stokes equations for nanofluids are the basic equations for this problem. Slip flow region, including the effects of velocity slip and temperature jump at the wall, are the main characteristics of flow in the slip flow region. Steady ...
متن کاملEffects of Slip Condition on the Characteristic of Flow in Ice Melting Process
In this paper a laminar flow of water on an ice layer subjected to a slip condition is considered numerically. The paper describes a parametric mathematical model to simulate the coupled heat and mass transfer events occurring in moving boundary problems associated with a quasi steady state steady flow process. The discretization technique of the elliptic governing differential equations of mas...
متن کاملBoundary layer Viscous Flow of Nanofluids and Heat Transfer Over a Nonlinearly Isothermal Stretching Sheet in the Presence of Heat Generation/Absorption and Slip Boundary Conditions
The steady two-dimensional flow of a viscous nanofluid of magnetohydrodynamic (MHD) flow and heattransfer characteristics for the boundary layer flow over a nonlinear stretching sheet is considered. Theflow is caused by a nonlinear stretching sheet with effects of velocity, temperature and concentrationslips. Problem formulation is developed in the pre...
متن کامل