Detection of a CO and NH3 gas mixture using carboxylic acid-functionalized single-walled carbon nanotubes
نویسندگان
چکیده
Carbon nanotubes (CNT) are extremely sensitive to environmental gases. However, detection of mixture gas is still a challenge. Here, we report that 10 ppm of carbon monoxide (CO) and ammonia (NH3) can be electrically detected using a carboxylic acid-functionalized single-walled carbon nanotubes (C-SWCNT). CO and NH3 gases were mixed carefully with the same concentrations of 10 ppm. Our sensor showed faster response to the CO gas than the NH3 gas. The sensing properties and effect of carboxylic acid group were demonstrated, and C-SWCNT sensors with good repeatability and fast responses over a range of concentrations may be used as a simple and effective detection method of CO and NH3 mixture gas.
منابع مشابه
A DFT study of interaction of folic acid drug on functionalized single-walled Carbon Nanotubes
In this work, the structural and electronic properties of folic acid molecule on functionalized (7,0)zigzag single-walled carbon nanotube was studied in gas phase on the basis of density functionaltheory (DFT). Furthermore, covalent interaction of folic acid with single-walled carbon nanotube wasinvestigated and its quantum molecular descriptors and binding energies were calculated. The DFTB3LY...
متن کاملPoly(m-aminobenzene sulfonic acid) functionalized single-walled carbon nanotubes based gas sensor
We have demonstrated a NH3, NO2 and water vapour sensor based on poly(m-aminobenzene sulfonic acid) functionalized single-walled carbon nanotube (SWNT–PABS) networks. The SWNT–PABS based sensors were fabricated by simple dispersion of SWNT–PABS on top of pre-fabricated gold electrodes. SWNT–PABS sensors showed excellent sensitivity with ppbv level detection limits (i.e., 100 ppbv for NH3 and 20...
متن کاملElectrochemical Sensing of H2S Gas in Air by Carboxylated Multi-walled Carbon Nanotubes
The electrochemical sensor for detecting hydrogen sulfide was fabricated. H2S gas molecules pass through polytetrafluoroethylene membrane with 0.22 mm pore size. Carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) were used to fabricate working and counter electrodes. It can be seen from Field Emission Scanning Electron Microscopy (FESEM) images of the working electrode that...
متن کاملA PARAMETRIC STUDY ON THE GROWTH OF SINGLE-WALLED CARBON NANOTUBES OVER CO-MO/MGO NANOCATALYST IN A FLUIDIZED BED REACTOR BY CCVD METHOD
Single-walled carbon nanotubes (SWNTs) with high yield and quality were synthesized using chemical vapor deposition (CVD) over Co-Mo/ MgO nanocatalyst in a fluidized bed reactor. Different parameters such as temperature, the ratio of hydrocarbon source to hydrogen, the flow rate of gas, growth time, the size of catalyst particles, heating rate, and the kind of hydrocarbon source were examined t...
متن کاملPurified and Functionalized MWCNTs: Application In CO2/CH4 Separation Using Mixed Matrix Membranes
To fabricate a defect free and high performance mixed matrix membrane (MMM), one approach is the functionalization of inorganic nanofillers (as dispersed phase) in the organic polymer matrix (as continuous phase) to modify the interactions between two phases. For this purpose,, raw multi-walled carbon nanotubes (rMWCNTs) were purified by acid mixture (HNO3/H2SO<sub...
متن کامل