A coupled arbitrary Lagrangian-Eulerian and Lagrangian method for computation of free surface flows with insoluble surfactants
نویسندگان
چکیده
A finite element scheme to compute the dynamics of insoluble surfactant on a deforming free surface is presented. The free surface is tracked by the arbitrary Lagrangian–Eulerian (ALE) approach, whereas the surfactant concentration transport equation is approximated in a Lagrangian manner. Since boundary resolved moving meshes are used in the ALE approach, the surface tension, which may be a linear or nonlinear function of surfactant concentration (equation of state), and the Marangoni forces can be incorporated directly into the numerical scheme. Further, the Laplace–Beltrami operator technique, which reduces one order of differentiation associated with the curvature, is used to handle the curvature approximation. A number of 3D-axisymmetric computations are performed to validate the proposed numerical scheme. An excellent surfactant mass conservation without any additional mass correction scheme is obtained. The differences in using a linear and a nonlinear equation of state, respectively, on the flow dynamics of a freely oscillating droplet are demonstrated. 2009 Elsevier Inc. All rights reserved.
منابع مشابه
Dynamic Fracture Analysis Using an Uncoupled Arbitrary Lagrangian Eulerian Finite Element Formulation
This paper deals with the implementation of an efficient Arbitrary Lagrangian Eulerian (ALE) formulation for the three dimensional finite element modeling of mode I self-similar dynamic fracture process. Contrary to the remeshing technique, the presented algorithm can continuously advance the crack with the one mesh topology. The uncoupled approach is employed to treat the equations. So, each t...
متن کاملSimulation of surface flows on a droplet in an oscillating pressure field
The surface flows on a droplet in an oscillating pressure field are simulated numerically by solving the Navier-Stokes equations using the Arbitrary Lagrangian-Eulerian and level set coupled method. Detailed transient flow fields in and around the droplet are calculated by performing parallel computations, and the flow phenomena in a thin layer around the droplet surface are discussed. The reci...
متن کاملتحلیل دینامیکی سدهای بتنی وزنی با مدلسازی مخزن به روشهای لاگرانژی و اویلری
Because of different behavior of reservoir water and dam material, the determination of hydrodynamic pressure during earthquake is very complicated. Thus, different formulations have been presented for modeling of the dam reservoir system under dynamic loading such as earthquake. These formulations can be categorized into two general groups, which are Lagrangian and Eulerian, each having advant...
متن کاملCoupled Eulerian-Lagrangian (CEL) Modeling of Material Flow in Dissimilar Friction Stir Welding of Aluminum Alloys
In this work, the finite element simulation of dissimilar friction stir welding process is investigated. The welded materials are AA 6061-T6 and AA 7075-T6 aluminum alloys. For this purpose, a 3D coupled thermo-mechanical finite element model is developed according to the Coupled Eulerian-Lagrangian (CEL) method. The CEL method has the advantages of both Lagrangian and Eulerian approaches, whic...
متن کاملArbitrary Lagrangian-Eulerian finite-element method for computation of two-phase flows with soluble surfactants
Article history: Received 20 September 2010 Received in revised form 3 January 2012 Accepted 13 January 2012 Available online 1 February 2012
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- J. Comput. Physics
دوره 228 شماره
صفحات -
تاریخ انتشار 2009