Stable, highly-responsive and broadband photodetection based on large-area multilayered WS2 films grown by pulsed-laser deposition.

نویسندگان

  • J D Yao
  • Z Q Zheng
  • J M Shao
  • G W Yang
چکیده

The progress in the field of graphene has aroused a renaissance of keen research interest in layered transition metal dichalcogenides (TMDs). Tungsten disulfide (WS2), a typical TMD with favorable semiconducting band gap and strong light-matter interaction, exhibits great potential for highly-responsive photodetection. However, WS2-based photodetection is currently unsatisfactory due to the low optical absorption (2%-10%) and poor carrier mobility (0.01-0.91 cm(2) V(-1) s(-1)) of the thin WS2 layers grown by chemical vapor deposition (CVD). Here, we introduce pulsed-laser deposition (PLD) to prepare multilayered WS2 films. Large-area WS2 films of the magnitude of cm(2) are achieved. Comparative measurements of a WS2-based photoresistor demonstrate its stable broadband photoresponse from 370 to 1064 nm, the broadest range demonstrated in WS2 photodetectors. Benefiting from the large optical absorbance (40%-85%) and high carrier mobility (31 cm(2) V(-1) s(-1)), the responsivity of the device approaches a high value of 0.51 A W(-1) in an ambient environment. Such a performance far surpasses the CVD-grown WS2-based photodetectors (μA W(-1)). In a vacuum environment, the responsivity is further enhanced to 0.70 A W(-1) along with an external quantum efficiency of 137% and a photodetectivity of 2.7 × 10(9) cm Hz(1/2) W(-1). These findings stress that the PLD-grown WS2 film may constitute a new paradigm for the next-generation stable, broadband and highly-responsive photodetectors.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mixed multilayered vertical heterostructures utilizing strained monolayer WS2.

Creating alternating layers of 2D materials forms vertical heterostructures with diverse electronic and opto-electronic properties. Monolayer WS2 grown by chemical vapour deposition can have inherent strain due to interactions with the substrate. The strain modifies the band structure and properties of monolayer WS2 and can be exploited in a wide range of applications. We demonstrate a non-aque...

متن کامل

Dependence of Magnetic Properties on Laser Ablation Conditions for Epitaxial La_{0.6}Sr_{0.4}MnO_{3} Thin Films Grown by Pulsed Laser Deposition

Epitaxial La0:6Sr0:4MnO3 (LSMO) thin films were grown by pulsed laser deposition. Relationships between magnetic properties of LSMO epitaxial thin films and ablation conditions such as ablated spot area and total incident laser energy in a pulsed laser deposition technique were studied. Ablated spot area was controlled by changing the focus lens position and total laser energy. Epitaxial growth...

متن کامل

Pulsed laser deposition of BaTiO3 thin films and their optical properties

Highly oriented a-axis BaTiO3 thin films were grown by pulsed laser deposition on ~001! MgO substrates. The full width at half-maximum of the ~200! BaTiO3 rocking curve was as narrow as 0.6°. A large hysteretic quadratic electro-optic effect was observed in a transverse geometry at 6328 Å. A birefringence shift up to 3310 was measured at an applied dc electric field of 1 kV/mm. It was found tha...

متن کامل

Characteristics of high quality ZnO thin films deposited by pulsed laser deposition

Thin films of ZnO have been deposited on glass and silicon substrates by the pulsed laser deposition technique employing a KrF laser ~l5248 nm!. The influence of the deposition parameters, such as substrate temperature, oxygen pressure, and laser fluence on the properties of the grown films, has been studied. All the films grown over a rather wide range of deposition conditions were found to be...

متن کامل

Longitudinal Magneto-Optical Kerr Effect in Ce:YIG Thin Films Incorporating Gold Nanoparticles

We report an experimental study on optical and magneto-optical properties of Cesubstituted yttrium iron garnet thin films incorporating gold nanoparticles. Au nanoparticles were formed by heating Au thin film on cubic quartz and garnet substrate in vacuum chamber and a Ce:YIG layer was deposited on them by the aid of Pulsed laser deposition method. A large enhancement of the longitudinal Kerr e...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nanoscale

دوره 7 36  شماره 

صفحات  -

تاریخ انتشار 2015