Load frequency control of interconnected hydro-thermal power system using conventional pi and fuzzy logic controller

In industry or any area increasing load is a vast problem for power generation plants due to increase in demand for power. So making balance between generation and demand is the operating principle of load frequency control (LFC). The reliable operation of a large interconnected power system necessarily requires an Automatic Generation Control (AGC). The objective of AGC is to regulate the power output of Generators within a specified area in response to change in the system frequency, tie line power or relation of the two to each other, so as to maintain the scheduled system frequency and power interchange in the other are within the prescribed limits. This paper presents the use of conventional PI controller and artificial intelligence to study the load frequency control of interconnected power system. In the proposed scheme, a control methodology is developed using conventional PI controller and Fuzzy Logic controller (FLC) for interconnected hydro-thermal power system. The control strategies guarantees that the steady state error of frequencies and inadvertent interchange of tie-lines power are maintained in a given tolerance limitations. The performances of the controllers are simulated using MATLAB/SIMULINK package. A comparison of Fuzzy controller and PI controller based approaches shows the superiority of proposed Fuzzy logic controller for step change in loading conditions. The simulation results also tabulated as a comparative performance in view of settling time and peak over shoot.