Advanced Metals and Alloys
نویسنده
چکیده
منابع مشابه
Corrosion behavior of metals and alloys in marine-industrial environment.
This work deals with atmospheric corrosion to assess the degrading effects of air pollutants on ferrous and non-ferrous metals and alloys, which are mostly used as engineering materials. An exposure study was conducted in the Tuticorin port area located on the east coast of South India, in the Gulf of Mannar with Sri Lanka to the southeast. Common engineering materials, namely mild steel, galva...
متن کاملAn Overview of Hydrogen Interaction with Amorphous Alloys
Theories, experimental results and applications associated with hydrogen behavior in amorphous metals and alloys are reviewed. An emphasis is made on the potential use of these advanced materials for hydrogen storage technology. Therefore, several properties that are especially relevant for such applications are assessed. These include structural models for hydrogen occupancy, sorption characte...
متن کاملConstruction of Deformation - Mechanism Maps for Metals and Solid Solution Alloys a New Approach
A new approach has been introduced to construct deformation-mechanism maps for metals and solid solution alloys. For this purpose two computer programs named DEFOR and GRAPH have been written in BASIC to be run on IBM compatible personal computers. Using these programs, deformation - mechanism maps for a number of pure metals and a solid solution alloy (Ti-6wt% Al) have been plotted and effects...
متن کاملBulk Amorphous Metals for Advanced Applications
Usually metals and alloys are in a crystalline state. However, metallic glasses ( amorphous metals ) can be obtained from certain alloys with the right composition, when they are quenched from the liquid state at a high enough cooling rate. Since their discovery in 1960, amorphous metals or metallic glasses have been developed from binary systems of micron size (ribbons and powders) to multi-co...
متن کاملAn investigation on metallurgical and mechanical properties of vacuum brazed Ti-6Al-4V to 316L stainless steel using Zr-based filler metal
Both Ti-6Al-4V and 316L stainless steels are widely used as engineering alloys. Fusion welding of these two alloys is not easily possible due to their incomplete solubility in each other. Brazing is one of the best choices for joining dissimilar alloys. In this study, wettability experiments were done at 940 and 970 ºC for 5, 15 and 30 min. Also, joining of these two alloys was carried out at 9...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007