Nonlinear Grid Design
ثبت نشده
چکیده
Many design techniques use a linear grid of square cells: Interesting results can be obtained by using nonlinear grids in which not all cells are square. An example is the Fibonacci grid in which the widths in heights
منابع مشابه
Efficient low-voltage ride-through nonlinear backstepping control strategy for PMSG-based wind turbine during the grid faults
This paper presents a new nonlinear backstepping controller for a direct-driven permanent magnet synchronous generator-based wind turbine, which is connected to the power system via back-to-back converters. The proposed controller deals with maximum power point tracking (MPPT) in normal condition and enhances the low-voltage ride-through (LVRT) capability in fault conditions. In this method, to...
متن کاملOptimization of the Lyapunov Based Nonlinear Controller Parameters in a Single-Phase Grid-Connected Inverter
In this paper, optimization of the backstepping controller parameters in a grid-connected single-phase inverter is studied using Imperialist competitive algorithm (ICA), Genetic Algorithm (GA) and Particle swarm optimization (PSO) algorithm. The controller is developed for the system based on state-space averaged model. By selection of a suitable Lyapunov function, stability of the proposed con...
متن کاملInvestigation of Double-layer Grid Space Structurer Resistance to Progressive Collapse
Considering the vulnerability of double-layer grid space structures to progressive collapse phenomenon, it is necessary to pay special attention to this phenomenon in the design process. Alternate path method is one of the most appropriate and accepted methods for progressive collapse resistant design of structures. Alternate Path Method permits local failure to occur but provides alternate pat...
متن کاملInvestigation of Double-layer Grid Space Structurer Resistance to Progressive Collapse
Considering the vulnerability of double-layer grid space structures to progressive collapse phenomenon, it is necessary to pay special attention to this phenomenon in the design process. Alternate path method is one of the most appropriate and accepted methods for progressive collapse resistant design of structures. Alternate Path Method permits local failure to occur but provides alternate pat...
متن کاملBuckling and Postbuckling of Concentrically Stiffened Piezo-Composite Plates on Elastic Foundations
This research presents the modeling and analysis for the buckling and postbuckling behavior of sandwich plates under thermal and mechanical loads. The lay-up configurations of plates are laminated composite with concentric stiffener and surface mounted piezoelectric actuators. The plates are in contact with a three-parameter elastic foundation including softening and/or hardening nonlinearity. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006