A numerical study on carbon nanotube–hybridized carbon fibre pullout
نویسندگان
چکیده
منابع مشابه
Numerical Study on Residual Thermal Stresses in Carbon Fibre Pullout
This paper investigated the effect of residual thermal stresses on carbon fibre pullout by using cohesive zone modelling. The finite element method was applied to analyse the residual thermal stress components along the interface between the fibre and matrix due to curing. A comparison study on the anisotropic and isotropic material properties are considered using four typical carbon fibres, T3...
متن کاملA numerical study on carbon nanotube pullout to understand its bridging effect in carbon nanotube reinforced composites
Carbon nanotube (CNT) reinforced polymeric composites provide a promising future in structural engineering. To understand the bridging effect of CNT in the events of the fracture of CNT reinforced composites, the finite element method was applied to simulate a single CNT pullout from a polymeric matrix using cohesive zone modelling. The numerical results indicate that the debonding force during...
متن کاملNumerical Study of Operating Pressure Effect on Carbon Nanotube Growth Rate and Length Uniformity
Chemical Vapor Deposition (CVD) is one of the most popular methods for producing Carbon Nanotubes (CNTs). The growth rate of CNTs based on CVD technique is investigated by using a numerical model based on finite volume method. Inlet gas mixture, including xylene as carbon source and mixture of argon and hydrogen as carrier gas enters into a horizontal CVD reactor at atmospheric pressure. In thi...
متن کاملNumerical Study of Furnace Temperature and Inlet Hydrocarbon Concentration Effect on Carbon Nanotube Growth Rate
Chemical Vapor Deposition (CVD) is one of the most important methods for producing Carbon Nanotubes (CNTs). In this research, a numerical model, based on finite volume method, is investigated. The applied method solves the conservation of mass, momentum, energy and species transport equations with aid of ideal gas law. Using this model, the growth rate and thickness uniformity of produced CNTs,...
متن کاملNumerical Study of Furnace Temperature and Inlet Hydrocarbon Concentration Effect on Carbon Nanotube Growth Rate
Chemical Vapor Deposition (CVD) is one of the most important methods for producing Carbon Nanotubes (CNTs). In this research, a numerical model, based on finite volume method, is investigated. The applied method solves the conservation of mass, momentum, energy and species transport equations with aid of ideal gas law. Using this model, the growth rate and thickness uniformity of produced CNTs,...
متن کامل