Evaluation of Composite Vane Materials for Rotary Sliding Vane Compressors
نویسندگان
چکیده
The physical performance characteristics of composite materials used for vanes in rotary, sliding-vane compressors, in general, are several orders of magnitude more difficult to quantify for design purposes than most homogeneous materials. This arises from the numerous variables that influence the response of these materials under the severe environmental conditions existing in such compressors. It is not the purpose of this report to develop a statistical analysis for predicting performance characteristics, but rather to enhance the understanding of the behavior of certain composite materials through the presentation of experimental data. A number of resin-reinforced materials were examined to determine specific physical properties that are believed to influence their performance in rotary, sliding-vane compressors. All these
منابع مشابه
Assuring Reliability of Compressors Using HFC Refrigerants
In Japan, the refrigerant used in room air-conditioners has been changed from HCFC-22 (R-22) to R-410A, a blend of HFC-32 and HFC-125 (50/50 vt%), in order to protect the ozone layer. Generally, the miscibility between the refrigerant and refrigeration oil must be assured, because the oil needs to return to the compressor from the refrigeration cycle and lubricate the sliding parts. Alternative...
متن کاملSelection of Friction Materials Used in Compact, High Performance Inverter Controlled Rotary Compressors
T. IIZUKA and K. IKEDA Tochigi Works Hitachi, Ltd. Shimotsuga-gun, Tochigi-ken, Japan, 329-44 Since applications of rotary compressors driven by inverter motors have become more widespread, l~bricating problems with the sliding parts have been appearing. The sliding parts require sufficient antiseizure and wear-resistant properties under the boundary lubricating conditions. The authors have dev...
متن کاملOn Transfer Slot Design in Rotary Sliding Vane Compressors with Special Attention to Gas Pulsation Losses
متن کامل
Dynamic Analysis of Roller and Vane of Inverter Controlled Rotary Compressors
This paper presents a complete dynamic analysis of roller and vane of a rotary compressor widely used for air-conditioners. An approach and a set of equations are developed estimating the type of motion at vane tip and roller interface and calculating the frictional force in accordance with the motion type. The forces on roller caused by relative motion between roller and cylinder wall are anal...
متن کامل