Foaming and foam stability for mixed polymer-surfactant solutions: effects of surfactant type and polymer charge.
نویسندگان
چکیده
Solutions of surfactant-polymer mixtures often exhibit different foaming properties, compared to the solutions of the individual components, due to the strong tendency for formation of polymer-surfactant complexes in the bulk and on the surface of the mixed solutions. A generally shared view in the literature is that electrostatic interactions govern the formation of these complexes, for example between anionic surfactants and cationic polymers. In this study we combine foam tests with model experiments to evaluate and explain the effect of several polymer-surfactant mixtures on the foaminess and foam stability of the respective solutions. Anionic, cationic, and nonionic surfactants (SDS, C(12)TAB, and C(12)EO(23)) were studied to clarify the role of surfactant charge. Highly hydrophilic cationic and nonionic polymers (polyvinylamine and polyvinylformamide, respectivey) were chosen to eliminate the (more trivial) effect of direct hydrophobic interactions between the surfactant tails and the hydrophobic regions on the polymer chains. Our experiments showed clearly that the presence of opposite charges is not a necessary condition for boosting the foaminess and foam stability in the surfactant-polymer mixtures studied. Clear foam boosting (synergistic) effects were observed in the mixtures of cationic surfactant and cationic polymer, cationic surfactant and nonionic polymer, and anionic surfactant and nonionic polymer. The mixtures of anionic surfactant and cationic polymer showed improved foam stability, however, the foaminess was strongly reduced, as compared to the surfactant solutions without polymer. No significant synergistic or antagonistic effects were observed for the mixture of nonionic surfactant (with low critical micelle concentration) and nonionic polymer. The results from the model experiments allowed us to explain the observed trends by the different adsorption dynamics and complex formation pattern in the systems studied.
منابع مشابه
Effects of Nanoclay on Cellular Morphology and Water Absorption Capacity of Poly(vinyl alcohol) Foam
The present work was aimed to examine the effects of incorporation of each of two different types of nanoclay, i.e. Cloisite Na+ and Cloisite 30B, into PVA foam on cellular morphology and water absorption capacity. Foam samples containing 0.0-10.0 wt% of each of the two types of nanoclay alone were prepared using mechanical foaming. Accordingly, PVA/organoclay/water suspensions were prepare...
متن کاملOptimized polymer enhanced foam flooding for ordinary heavy oil reservoir after cross-linked polymer flooding
A successful cross-linked polymer flooding has been implemented in JD reservoir, an ordinary heavy oil reservoir with high permeability zones. For all that, there are still significant volumes of continuous oil remaining in place, which can not be easily extracted due to stronger vertical heterogeneity. Considering selective plugging feature, polymer enhanced foam (PEF) flooding was taken as fo...
متن کاملEffects of protonation on foaming properties of dodecyldimethylamine oxide solutions: a pH-study.
The critical micelle concentration (cmc), the surface excess (Γ), as well as the micelle aggregation number (m) of the surfactant dodecyldimethylamine oxide (C12DMAO) have been reported to strongly depend on the pH-value of the aqueous surfactant solution. At high ionic strength, the cmc displays a minimum, while both Γ and m have a maximum at a pH-value close to the pKa of the surfactant. Thes...
متن کاملPolysaccharide/Surfactant complexes at the air-water interface - effect of the charge density on interfacial and foaming behaviors.
The binding of a cationic surfactant (hexadecyltrimethylammonium bromide, CTAB) to a negatively charged natural polysaccharide (pectin) at air-solution interfaces was investigated on single interfaces and in foams, versus the linear charge densities of the polysaccharide. Besides classical methods to investigate polymer/surfactant systems, we applied, for the first time concerning these systems...
متن کاملRelationship between Micellar Lifetime and Foamability of Sodium Dodecyl Sulfate and Sodium Dodecyl Sulfate/ 1-Hexanol Mixtures
The interface between air and surfactant solution expands rapidly during the foam generation process. Surfactant molecules in the solution should adsorb onto the newly created surface to stabilize foam. As surfactant monomers adsorb on the surface, micelles disintegrate to provide additional monomers to adsorb on the expanding interface of foam. If micelles are very stable, they cannot rapidly ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Langmuir : the ACS journal of surfaces and colloids
دوره 28 11 شماره
صفحات -
تاریخ انتشار 2012