Characterizing Weave Geometry in Textile Ceramic Composites Using Digital Image Correlation
نویسندگان
چکیده
Michael N. Rossol, John H. Shaw, Hrishikesh Bale, Robert O. Ritchie, David B. Marshall,k and Frank W. Zok Materials Department, University of California, Santa Barbara, California 93106 Department of Materials Science and Engineering, University of California, Berkeley, California 94720 Materials Science Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720 kTeledyne Scientific Company, Thousand Oaks, California 91360
منابع مشابه
Stochastic Geometric Properties Of Woven Textiles
This paper addresses geometric variability of woven textiles used in composites manufacturing. Variability in tow directions and unit cell size is quantified by applying an image analysis procedure to two representative materials; a pre-impregnated carbon/epoxy satin weave textile and a commingled glass/polypropylene fabric, and the spatial autocorrelation of stochastic variables is characteriz...
متن کاملExperimental Assessment of Toughness in Ceramic Matrix Composites using the J-integral with Digital Image Correlation Part I: Methodology and Validation
The complex nature of damage in ceramic matrix composites (CMCs) renders conventional methods of measuring quantitative fracture properties impractical. This paper is the first of twopart series that assesses the feasibility of using the J-integral with full-field deformation data from Digital Image Correlation (DIC) to characterize toughness in continuous fiber SiC/SiC CMC laminates. It provid...
متن کاملA Level-Set Based Representative Volume Element Generator and XFEM Simulations for Textile and 3D-Reinforced Composites
This contribution presents a new framework for the computational homogenization of the mechanical properties of textile reinforced composites. A critical point in such computational procedures is the definition and discretization of realistic representative volume elements (RVEs). A geometrically-based weave generator has been developed to produce realistic geometrical configurations of the rei...
متن کاملOn the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization
A series of tests have been conducted to investigate fatigue damage characterization in corroded welded steel plates using structural health monitoring (SHM) techniques. Acoustic Emission (AE) is a non-destructive testing (NDT) technique with potential applications for locating and monitoring fatigue cracks in service. In the present work, AE is implemented to characterize damage during crack e...
متن کاملSVC Method for Textile Weave Recognizing
Support vector classification (SVC) method is proposed to dive the wrap and weft point, for recognizing the textile weave. As the densities of wrap and weft are known, this image of the textile can be divided in to rectangle of wrap and weft point. The wrap points’ histograms of R, G and B channel are different from the weft points’. So the SVC can trains the swatch by their eigenvectors which ...
متن کامل