Design and Analysis of CMOS Cells using Adiabatic Logic
نویسنده
چکیده
This paper deals with two types of inverter structure design using CMOS and adiabatic technique. Power consumption is the important and basic parameters of any kind of digital integrated circuit (IC). There is always a tradeoff between power and performance to meet the systems requirement. System cost is directly affected by power. Adiabatic circuits are those circuits which work on the principle of adiabatic charging and discharging and which recycle the energy from output nodes instead of discharging it to ground. Conventional CMOS circuits achieve a logic ‘1’ or logic ‘0’ by charging the load capacitor to supply voltage Vdd and discharging it to ground respectively. All simulation result and analysis are perform on 180nm TSMC technology using tanner tool.
منابع مشابه
Design and Analysis of Conventional CMOS and Energy Efficient Adiabatic Logic for Low Power VLSI Application
In recent years, low power circuit design has been an important issue in VLSI design areas. Adiabatic logics, which dissipate less power than static CMOS logic, have been introduced as a promising new approach in low power circuit design. energy. This paper proposes an Adder circuit based on energy efficient two-phase clocked adiabatic logic. A simulative investigation on the proposed 1-bit ful...
متن کاملUltra Low Power Symmetric Pass Gate Adiabatic Logic with CNTFET for Secure IoT Applications
With the advent and development of the Internet of Things, new needs arose and more attention was paid to these needs. These needs include: low power consumption, low area consumption, low supply voltage, higher security and so on. Many solutions have been proposed to improve each one of these needs. In this paper, we try to reduce the power consumption and enhance the security by using SPGAL, ...
متن کاملImplementation of SKLANSKY Tree Adder using Quasi Static Adiabatic Logic
This paper presents the design for low power circuilts which use reversible logic to conserve energy. The project presents the implementation of a Sklansky tree adder structure using a quasi static adiabatic logic namely CEPAL (Complementary Energy Path Adiabatic Logic). The SKLANSKY Tree adder structure has been chosen due to its increased fan-out that results in reduced latency and improved s...
متن کاملComparative Analysis of Conventional CMOS and Energy Efficient Adiabatic Logic Circuits
-In recent years, low power circuit design has been an important issue in System on Chip (SoC) and VLSI design areas. Adiabatic logics, which dissipate less power than static CMOS logic, have been introduced as a promising new approach in low power circuit design. Adiabatic circuits are those circuits which work on the principle of adiabatic charging and discharging and which recycle the energy...
متن کاملStudy and Analysis of Two Partially Adiabatic Inverters (PADI)
The dynamic power requirement of CMOS circuits is rapidly becoming a major concern in the design of personal information systems and large computers. Battery operated portable computers and wireless communication products have often been used. Thus low power integrated circuit design has been strongly demanded for implementation. One of the promising techniques of low power design is adiabatic ...
متن کامل