In-Situ Mechanical Testing of Nano-Component in TEM
نویسندگان
چکیده
منابع مشابه
Double-tilt in situ TEM holder with multiple electrical contacts and its application in MEMS-based mechanical testing of nanomaterials.
MEMS and other lab-on-a-chip systems are emerging as attractive alternatives to carry out experiments in situ the electron microscope. However, several electrical connections are usually required for operating these setups. Such connectivity is challenging inside the limited space of the TEM side-entry holder. Here, we design, implement and demonstrate a double-tilt TEM holder with capabilities...
متن کاملIn-Situ Polymerization of UHMWPE Using Bi-Supported Ziegler-Natta Catalyst of MoS2 Oxide/MgCl2 (Ethoxide Type)/TiCl4/TiBA: Study of Thermo-Mechanical Properties of System
The use of UHMWPE has attracted the attention of many researchers and industries. The aim of the present work is to fabricate UHMWPE/MoS2-Oxide nano-composites using in-situ polymerization. For this purpose, modified molybdenum disulfide was used. In order to perform the polymerization, a Ziegler-Natta catalytic system, with MoS2-Oxide and magnesium Ethoxide as support, was used. In order to fa...
متن کاملPushing the envelope of in situ transmission electron microscopy.
Recent major improvements to the transmission electron microscope (TEM) including aberration-corrected electron optics, light-element-sensitive analytical instrumentation, sample environmental control, and high-speed and sensitive direct electron detectors are becoming more widely available. When these advances are combined with in situ TEM tools, such as multimodal testing based on microelectr...
متن کاملHydroxyapatite - starch nano biocomposites synthesis and characterization
Bone like hydroxyapatite (nHAp) was synthesized via an in situ biomimetic process in presence of wheat starch. The effect of polymer concentration alteration on the final structure of nHAp was investigated. Formation of the nHAp at room temperature was confirmed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Size and morphology of the nHAp samples were character...
متن کاملA MEMS device for In Situ TEM/AFM/SEM/STM Testing of Carbon Nanotubes and Nanowires
A MEMS device for in-situ TEM/AFM/SEM/STM testing of nano structures is designed. Two deformation measurement methods are discussed: microscopic measurement and electrical measurement. For the first method, the device consists of a comb-drive actuator, calibration beam and specimen stage. The stiffness of the specimen can be well characterized by comparing the load-displacement relation before ...
متن کامل