Spatial geometric effects on the friction coefficients of UHMWPe
نویسندگان
چکیده
Spatial geometric effects on the friction coefficients of UHMWPe Alison C. Dunn a, Jason G. Steffens a, David L. Burris a, Scott A. Banks b, W. Gregory Sawyer a,∗ a Department of Mechanical and Aerospace Engineering, P.O. Box 116300 University of Florida, Gainesville, FL 32611, USA b Department of Mechanical and Aerospace Engineering, J. Crayton Pruitt Department of Biomedical Engineering, P.O. Box 116250, University of Florida, Gainesville, FL 32611, USA
منابع مشابه
An Investigation Into the Effects of Friction and Anisotropy Coefficients and Work Hardening Exponent on Deep Drawing With FEM
Large strains, anisotropy of mechanical properties of materials and Coulomb friction in contact regions are some properties in the analysis of deep drawing process. In this research, the effects of different parameters such as anisotropy coefficient, work hardening exponent and friction coefficient on deep drawing process of drawing quality steel are studied. For this purpose, the finite elemen...
متن کاملPotential for adhesive wear in friction couples of UHMWPE running against oxidized zirconium, titanium nitride coatings, and cobalt-chromium alloys.
The classical wear mechanisms abrasion, fatigue, and adhesion are the most frequent causes of surface changes of ultra high molecular weight polyethylene (UHMWPE) in artificial joints. The counterpart material has a strong influence on the wear and friction behavior of artificial joints due to its abrasive properties and adhesive interaction with UHMWPE. The formation of a transfer layer on the...
متن کاملStoring Period Effects on Wear Properties in Uhmwpe Inserts for Artificial Joints
INTRODUCTION Artificial joints have been increasingly used in treatment of physically disabled people who have severely damaged joints. In artificial joint, ultra high molecular weight polyethylene (UHMWPE) has been usually employed as a buffer because of its very low friction coefficient, high wear resistance, high impact strength, and biocompatibility. [1]. When artificial joints were replace...
متن کاملTribological Property of FG/UHMWPE Composites
Fluorinated graphene/ultra high molecular weight polyethylene (FG/UHMWPE) composites were prepared by ultrasonic dispersion and hot pressing. The mechanical propertys and tribological property of pure UHMWPE and FG/UHMWPE composites were investigated by micro hardness tester and high-speed reciprocating friction tester. The wear volume of the sample was measured by the scanning electron microsc...
متن کاملTribological characterization of a biocompatible thin film of UHMWPE on Ti6Al4V and the effects of PFPE as top lubricating layer.
Ultra-high molecular weight polyethylene (UHMWPE) thin film was coated onto Ti6Al4V alloy specimens using dip coating method. Tribological performance of this coating (thickness of 19.6 ± 2.0 μm) was evaluated using 4 mm diameter Si(3)N(4) ball counterface in a ball-on-disk tribometer. Tests were carried out for different normal loads (0.5, 1.0, 2.0 and 4.0 N) and rotational speeds of the disk ...
متن کامل