Simulating Microstructural Evolution and Electrical Transport in Ceramic Gas Sensors
نویسندگان
چکیده
An integrated computational approach to microstructural evolution and electrical transport in ceramic gas sensors has been proposed. First, the particle-flow model and the continuum-phase-field method are used to describe the microstructural development during the sintering of a prototype two-dimensional film. Then, the conductivity of the sintering samples is calculated concurrently as the microstructure evolves, using both resistor lattice models and effective medium theory for electrical transport in porous aggregates of lightly sintered particles. This approach, when combined with the modeling of resistivity at the grain–grain contacts as a function of neck geometry, ambient gas concentration and temperature, could facilitate the development and optimization of novel microstructures for advanced ceramic gas sensors.
منابع مشابه
Numerical Calculation of Electrical Conductivity of Porous Electroceramics
A numerical method for the calculation of the electrical conductivity of porous ceramics for gas sensing applications is developed, which takes into account detailed microstructural features by mapping a mesoscopic irregular resistor network onto the microstructure. The overall conductance of the ceramic sample is obtained by solving the Kirchhoff equations for the irregular network using an ef...
متن کاملThe effect of nano transition metals on microstructure and phase evolution of low carbon MgO-C refractories
In the present study, the effect of Iron Nitrate as catalytic precursor to in situ formation of nano-Fe particles in phenolic resin and microstructural evolution of MgO-C refractories has been investigated. Therefore, various samples according to matrix section formulation of low carbon MgO-C refractories (LCMCR’s) with 0 and 6 wt% (Fe/Phenolic resin) were prepared and phase and microstructure ...
متن کاملDMMP Sensing Performance of Undoped and Al Doped Nanocrystalline ZnO Thin Films Prepared by Ultrasonic Atomization and Pyrolysis Method
Highly textured undoped (pure) and Al doped ZnO nanocrystalline thin films prepared by ultrasonic atomization and pyrolysis method are reported in this paper. ZnCl2 water solution was converted into fine mist by ultrasonic atomizer (Gapusol 9001 RBI Meylan, France). The mist was pyrolyzed on the glass substrates in horizontal quartz reactor placed in furnace. The Structural and microstructural ...
متن کاملMicrostructural control and selective C2H5OH sensing properties of Zn2SnO4 nanofibers prepared by electrospinning.
Microstructural evolution of spinel Zn(2)SnO(4) nanofibers was manipulated via an in situ phase separation process of inorganic precursors and a matrix polymer during electrospinning and calcination. Chemiresistive gas sensors using porous Zn(2)SnO(4) fibers exhibited superior C(2)H(5)OH sensing response.
متن کاملBase-Metal Electrode-Multilayer Ceramic Capacitors: Past, Present and Future Perspectives
Multilayer ceramic capacitor (MLCC) production and sales figures are the highest among fine-ceramic products developed in the past 30 years. The total worldwide production and sales reached 550 billion pieces and 6 billion dollars, respectively in 2000. In the course of progress, the development of base-metal electrode (BME) technology played an important role in expanding the application area....
متن کامل