A Study of Cold Rolling Titanium by Transmission Electron Microscopy
نویسندگان
چکیده
Cold rolling behaviours of a commercial pure titanium have been studied by means of transmission electron microscopy. The results indicates: (1) In cold rolled titanium, there are a number of tangled dislocations which have often been observed in cold worked face centered cubic metals. (2) In 16.7% cold rolled Ti, imperfect structures with a high concentration of tangled dislocations were observed and a great number of uniformly distributing dislocation loops were observed. They were also observed in 50.0% rolled Ti. (Received September 23. 1963)
منابع مشابه
Effect of TiO2 nanoparticles on the bond strength of CP Ti sheet by cold Rolling method
In this work, the strength of cold roll bond of the commercially pure titanium (CP Ti) sheet and the effect of TiO2 nanoparticles on bond strength was investigated. Through the accumulative roll bonding process, which is considered among the important severe plastic deformation processes, the creation of suitable bonds plays a significance role in the ultimate strength of the bond. Thus, resear...
متن کاملFabrication of an Ultra-Fine Grained Pure Titanium with High Strength and Good Ductility via ECAP plus Cold Rolling
Microstructure evolutions and mechanical properties of a commercially pure titanium (CP-Ti, grade 2) during multi-pass rotary-die equal-channel angular pressing (RD-ECAP) and cold rolling (CR) were systematically investigated in this work, to achieve comprehensive property for faster industrial applications. The obtained results showed that the grain size of CP-Ti decreased from 80 μm of as-rec...
متن کاملSTUDY OF THE STRUCTURE OF INTERMETALICS FROM Fe - Al SYSTEM AFTER THE HOT ROLLING
M. Jabłońska, I. Bednarczyk, K. Rodak, A. Śmiglewicz Silesian University of Technology, Faculty of Materials Science and Metallurgy, Institute of Materials Science Katowice, Poland This paper presents the results of structure analysis of Fe Al alloys after hot rolling deformation. Microstructure analysis were performed before and after deformation using a scanning transmission electron microsco...
متن کاملAqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method
In this study, green or eco-friendly synthesis of TiO2 nanoparticles (NPs) was performed by using the aqueous extract of Acanthophyllum laxiusculum. The plant genus Acanthophyllumis one of the natural sources rich in nonionic surface active agents known as saponins. Sol-gel method as one of the most common techniques widely used in nano-field was applied to synthesize the titanium dioxide nanop...
متن کاملThe Effect of Cross-Rolling Process on Nanostructure of Al 1050 Alloy
The cross-rolling is a new process that results in significant evolutions in microstructure of the metallic sheets. In this study, an aluminium 1050 sheet was rolled up to 95% reduction in cross directions for ten passes. The rolled samples were investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The rolled samples possess a high dislocation density and ultra-fin...
متن کامل