IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 03, 2016 | ISSN (online): 2321-0613
نویسنده
چکیده
As required controlling speed of motors to do control prosthetic arm movement, conventional control method is not reliably control multiple functions together, So, new control strategy is requiring tackling with this difficult problem. In this review paper we survey some recent developments of various methodologies for improvement in settling time and overshoot.
منابع مشابه
IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 03, 2016 | ISSN (online): 2321-0613
A Parallel multiplier using approximate compressors are proposed in this paper. The two new approximate 4-2 compressors are proposes that the simplified compressors have better power consumption than the optimized 4-2 compressor existing designs. These approximate compressors are then used in the restoration module of a Parallel multiplier. Four different schemes for utilizing the proposed appr...
متن کاملIJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 10, 2016 | ISSN (online): 2321-0613
several edge recognition strategies have now been planned within the past decades. Many are derived from differential strategies such as for example Sobel, Roberts, Laplacian operators, and therefore on. Nevertheless these calculations are quite sensitive to sound, in order to restrain sound before sensing edges. In this report intensive literature review has been presented in numerous edge rec...
متن کاملIJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 02, 2016 | ISSN (online): 2321-0613
This paper describes the cross-talk analysis of high-speed PCB design. Some models using multiple PCB traces above a ground plane having guard traces and vias are taken and the results are obtained from modeling and simulation using Ansoft HFSS software tool and are compared with the experimental results. Reduction techniques of crosstalk are highlighted.
متن کاملIJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 04, 2016 | ISSN (online): 2321-0613
Globalization, growing competition and with emergence of new technologies, change shows economic profile of nations & knowledge driven economies have created a scenario where quality is no more a desirable strategy –it has become a survival strategy. Six Sigma is widely used in material & service organizations to enhance quality & to reduce cost but the time has come to move one step further to...
متن کاملIJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 03, 2016 | ISSN (online): 2321-0613
Input vector monitoring concurrent built-in selftest schemes perform testing during the normal operation of the circuit without imposing a need to set the circuit offline to perform the test. These schemes are evaluated based on the hardware overhead and the concurrent test latency i.e., the time required for the test to complete, whereas the circuit operates normally. In this brief, we present...
متن کامل