Cfd Simulation of Fortum Pts Experiment
نویسنده
چکیده
Detailed simulation of the thermal stresses of the reactor pressure vessel (RPV) wall in case of pressurized thermal shock (PTS) requires the simulation of the thermal mixing of cold high-pressure safety injection (HPI) water injected to the cold leg and flowing further to the downcomer. The simulation of the complex mixing phenomena including e.g. stratification in the cold leg and buoyancy driven plume in the downcomer is a great challenge for CFD methods and requires careful validation of the used modelling methods. The selected experiment of Fortum mixing test facility modelling the Loviisa VVER-440 NPP has been used for the validation of CFD methods for thermal mixing phenomena related to PTS. The experimental data includes local temperature values measured in the cold leg and downcomer. Conclusions have been made on the applicability of used CFD method to thermal mixing simulations in case with stratification in the cold leg and buoyant plume in the downcomer.
منابع مشابه
Investigation of concentration polarization in a cross-flow nanofiltration membrane: Experiment and CFD modelling
Numerous researches have been investigated on the mass transfer phenomena and hydrodynamics for the fluid in the vicinity of the membrane surface by the mathematical modelling and simulation. Due to complexities involved in solving transport phenomena within membranes, the application of CFD simulation study for determining the concentration polarization (CP) profile in the membrane channel is ...
متن کاملIncreasing the Performance of OFDM Systems by PAPR Reduction in PTS Technique using Election Optimization Algorithm
Orthogonal Frequency Division Multiplexing (OFDM) is a useful technology in wireless communications that provides high-rate data transmission in multipath fading channels. The advantages of OFDM systems are the high spectral efficiency and strong resistance to frequency selective fading. In OFDM systems, a large number of sub-carriers are used to modulate the symbols causing the time-domain OFD...
متن کاملCFD results calibration from sparse sensor observations with a case study for indoor thermal map
Current CFD calibration work has mainly focused on the CFD model calibration. However no known work has considered the calibration of the CFD results. In this paper, we take inspiration from the image editing problem to develop a methodology to calibrate CFD simulation results based on sparse sensor observations. We formulate the calibration of CFD results as an optimization problem. The cost f...
متن کاملPlanar and SPECT Monte Carlo acceleration using a variance reduction technique in I131 imaging
Background: Various variance reduction techniques such as forced detection (FD) have been implemented in Monte Carlo (MC) simulation of nuclear medicine in an effort to decrease the simulation time while keeping accuracy. However most of these techniques still result in very long MC simulation times for being implemented into routine use. Materials and Methods: Convolution-based force...
متن کامل