Characteristics of Erbium-Doped Superfluorescent Fiber Sources for Interferometric Sensor Applications
نویسندگان
چکیده
The fcharacteristics of 1.55 pm Er-doped superfluorescent fiber sources (SFS's), intended for fiber-optic gyroscope (FOG) applications, are explored theoretically and experimentally. With proper selection of the source configuration, fiber length, pump wavelength, pump power, and fiber composition, we show that it is possible to meet the stringent requirements of the FOG, including a high output power, broad emission bandwidth, and excellent spectral thermal stability. Variations of the mean wavelength, spectral width, and output power of the SFS with fiber length, pump power, pump wavelength, and temperature are modeled for representative sources pumped near 980 nm or 1.48 pm, and are shown to be in good agreement with experimental results. The effects of a multimoded pump, erbium ion pair, and optical feedback are also assessed. This study indicates that the Er-doped SFS is an excellent candidate for the FOG and for other applications requiring spatial coherence and low temporal coherence.
منابع مشابه
1 Watt Er / Yb Single - mode Superfluorescent Optical Fibre Source
We describe a single-mode superfluorescent Er/Yb optical fibre source capable of generating greater than 1 Watt of output power. The spectral bandwidth of the source can be varied between 0.5 and 4 nm by filtering. Superfluorescent sources based on rare-earth doped single mode fibres [ 1,2] are potentially useful in many applications requiring high brightness combined with broad bandwidth and l...
متن کاملAn Overview and Feasibility Study of Fabrication Technology and Characterization Techniques of Erbium-Doped Fiber amplifiers in Iran
In this paper, a brief summary of different methods of fabrication of optical preform and fiber is reviewed. Several methods of incorporation of erbium ions into optical preforms are studied. Characterization of the fabricated erbium doped fibers including measurements of refractive index profile, absorption, fluorescence and gain spectra and metastable lifetime are described. It is also expres...
متن کاملGain, Noise Figure and Efficiency Characteristics of an L-Band Erbium Doped Fiber Amplifier
In this work, the construction of a single stage L-band erbium-doped fiber amplifier which incorporates a short 5.1 m erbium doped fiber coil is described. Gain and noise figure measurements as a function of forward, backward and counter-propagating CW 1480 nm pumping schemes at different pump power levels are presented. Further, the Erbium Doped Fiber Amplifier (EDFA) power conversion efficien...
متن کاملObservation of Raman Gain in Reduced Length of Bismuth Erbium Doped Fiber
Raman amplification of a 49 cm Bismuth oxide (Bi2O3) as a nonlinear gainmedium based erbium doped fiber amplifier (EDFA) is reported in new and compactdesign in near infrared spectral regions. The bismuth glass host provides theopportunity to be doped heavily with erbium ions to allow a compact optical gain fiberamplifier design by using reduced fiber length and the 1480...
متن کاملDevelopment of 3.6 mW Er- doped C-band super fluorescent fiber source pumped at 980 nm
A 3.6mW single pass backward signal superfluorescent fiber source having a spectral width of 27.417nm was developed at a pump wavelength of 980.5nm and presented the experimental results along with non-flattened ASE spectrum. The fiber source could have direct applications in fiber sensors like fiber gyroscope or, in general, in any optical sensors in which a broad spectral band and high power ...
متن کامل