Low moisture permeation measurement through polymer substrates for organic light emitting devices
نویسندگان
چکیده
Low permeation measurements through polymer substrates is very critical and there is no definite commercial method for measuring a water vapor transmission rate of 10 gym yday at 39 8C and 95% RH at atmospheric pressure. A novel moisture y6 2 permeation measurement method and model was developed qualitatively and quantitatively with the ‘calcium degradation test’ method. It is well known that organic light emitting device structures and other active display materials degrade in the presence of oxygen and moisture. This method would be highly suitable for assessing ultra high barrier properties of polymer substrates for organic light emitting device applications. 2002 Elsevier Science B.V. All rights reserved.
منابع مشابه
High-efficiency organic polymer light-emitting heterostructure devices on flexible plastic substrates
Articles you may be interested in High-contrast organic light-emitting diodes on flexible substrates Appl. High-performance polymer light-emitting diodes doped with a red phosphorescent iridium complex Appl. High-efficiency, low-drive-voltage, semitransparent stacked organic light-emitting device Appl.
متن کاملMoisture Permeability Through Multilayered Barrier Films as Applied to Flexible OLED Display
Strict protection of organic light-emitting diodes (OLEDs) and other optoelectronic materials from direct contact with ambient moisture and oxygen is one of the major challenges in the development of flexible OLED displays and other flexible electronic devices. This problem is typically addressed by the use of polymeric substrates with multilayered barrier coatings comprising alternating organi...
متن کاملThin film encapsulation for flexible AM-OLED
Flexible organic light emitting diode (OLED) will be the ultimate display technology to customers and industries in the near future but the challenges are still being unveiled one by one. Thin-film encapsulation (TFE) technology is the most demanding requirement to prevent water and oxygen permeation into flexible OLED devices. As a polymer substrate does not offer the same barrier performance ...
متن کاملGraphene electrodes for organic metal-free light-emitting devices
In addition to its fascinating electrical and mechanical properties, graphene is also an electrochemically stable and transparent electrode material. We demonstrate its applicability as both anode and cathode in a light-emitting electrochemical cell (LEC), an electrochemical analogue to a polymer organic light-emitting diode. Specifically, we summarize recent progress in carbon-based metal-free...
متن کاملInfluences of Device Architectures on Characteristics of Organic Light-Emitting Devices Incorporating Ambipolar Blue-Emitting Ter(9,9-diarylfluorenes)
In this article, we report the studies of various device architectures of organic lightemitting devices (OLEDs) incorporating highly efficient blue-emitting and ambipolar carriertransport ter(9,9-diarylfluorene)s, and their influences on device characteristics. The device structures investigated include single-layer devices and multilayer heterostructure devices employing the terfluorene as one...
متن کامل