A Novel Electro-Thermal Laminated Ceramic with Carbon-Based Layer
نویسندگان
چکیده
A novel electro-thermal laminated ceramic composed of ceramic tile, carbon-based layer, dielectric layer, and foaming ceramic layer was designed and prepared by tape casting. The surface temperature achieved at an applied voltage of 10 V by the laminated ceramics was 40.3 °C when the thickness of carbon-based suspension was 1.0 mm and the adhesive strength between ceramic tile and carbon-based layer was 1.02 ± 0.06 MPa. In addition, the thermal aging results at 100 °C up to 192 h confirmed the high thermal stability and reliability of the electro-thermal laminated ceramics. The development of this laminated ceramic with excellent electro-thermal properties and safety provides a new individual heating device which is highly expected to be widely applied in the field of indoor heat supply.
منابع مشابه
Evaluating the Effects of Ceramic Layer and Thermal Dam on Optimizing the Temperature Gradient of a Gasoline Engine Piston (TECHNICAL NOTE)
The purpose of this paper is to evaluate the effect of different methods for improving the temperature gradient of a specified gasoline engine piston. With a robust FE based software, 3D thermal analyses have been carried out for the piston model. Unlike previous studies, the effects of both fully and locally ceramic layers on the crown top surface were considered. It was found that a fully cer...
متن کاملKinetic Study of the Electrocatalytic Oxidation of Acetaldehyde at Ni/Al Layered Double Hydroxide Modified sol-gel derived carbon ceramic electrode
In this research, we reported a novel modified carbon ceramic electrode (CCE) using Ni/Al Layered double hydroxide as modifier was fabricated by sol-gel technique. The Ni/Al Layered double hydroxide modified sol gel derived carbon ceramic (Ni/Al LDH-SGD-CC) electrode was used for electrocatalytic oxidation of acetaldehyde. The oxidation of acetaldehyde happens at the potential where Ni (III) sp...
متن کاملSize-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory
In this study, the effect of finite strain on bending of the geometrically nonlinear of micro laminated composite Euler-Bernoulli beam based on Modified Couple Stress Theory (MCST) is studied in thermal environment. The Green-Lagrange strain tensor according to finite strain assumption and the principle of minimum potential energy is applied to obtain governing equation of motion and boundary c...
متن کاملPlatinum Nanoparticles Deposited on Oxygen-Containing Functional Groups at Carbon Vulcane XC-72 as a Cathode Catalyst for Direct Methanol Fuel Cell
Surface oxidized carbon vulcane XC-72 is prepared as catalyst support and platinumnanoparticles are chemically anchored onto the modified surface. The nanoparticles of Pt weresynthesized by reduction of H2PtCl6 with sodium borohydride in a 5.5 M buffer solution ofsodium citrate; the complexation of citrate with metal ions is beneficial to the formation ofnanoparticles. The electro-oxidation of ...
متن کاملFabrication of membranes and microchannels in low temperature co-fired ceramic (LTCC) substrate using novel water-based sacrificial carbon pastes
In this work, 3D structuration of LTCC (Low-Temperature Co-fired Ceramic) for microfluidics was studied, using two novel sacrificial carbon paste compositions. These pastes are based on graphite with a water-soluble vehicle consisting of polyvinylpyrrolidone binder (PVP) dissolved in propylene glycol (PG), which is not aggressive to green LTCC material. Both examined pastes differ slightly in b...
متن کامل