Effects of primary breakup modeling on spray and combustion characteristics of compression ignition engines

0010-2180/$ see front matter 2010 The Combust doi:10.1016/j.combustflame.2010.02.018 * Corresponding author. Address: University of Illin Mechanical & Industrial Engineering, 842 West Tayl 7022, USA. Fax: +1 312 413 0441. E-mail address: [email protected] (S.K. Aggarwal). Injector flow dynamics and primary breakup processes are known to play a pivotal role in determining combustion and emissions in diesel engines. In the present study, we examine the effects of primary breakup modeling on the spray and combustion characteristics under diesel engine conditions. The commonly used KHmodel, which considers the aerodynamically induced breakup based on the Kelvin–Helmholtz instability, is modified to include the effects of cavitation and turbulence generated inside the injector. The KH model and the new (KH-ACT) model are extensively evaluated by performing 3-D time-dependent simulations with detailed chemistry under diesel engine conditions. Results indicate that the inclusion of cavitation and turbulence enhances primary breakup, leading to smaller droplet sizes, decrease in liquid penetration, and increase in the radial dispersion of spray. Predictions are compared with measurements for non-evaporating and evaporating sprays, as well as with flame measurements. While both the models are able to reproduce the experimentally observed global spray and combustion characteristics, predictions using the KH-ACT model exhibit closer agreement with measurements in terms of liquid penetration, cone angle, spray axial velocity, and liquid mass distribution for non-evaporating sprays. Similarly, the KH-ACT model leads to better agreement with respect to the liquid length and vapor penetration distance for evaporating sprays, and with respect to the flame lift-off location for combusting sprays. The improved agreement is attributed to the ability of the new model to account for the effects of turbulence and cavitation generated inside the injector, which enhance the primary breakup. Results further indicate that the combustion under diesel engine conditions is characterized by a double-flame structure with a rich premixed reaction zone near the flame stabilization region and a non-premixed reaction zone further downstream. This flame structure is consistent with the Dec’s model for diesel engine combustion (Dec, 1997) [1], and well captured by a newly developed flame index based on the scalar product of CO and O2 mass fraction gradients. 2010 The Combustion Institute. Published by Elsevier Inc. All rights reserved.