New Multifunctional Frequency Filter Working in Current-mode
نویسندگان
چکیده
Increasing demands on circuits with low supply voltage and low power consumption lead to the realization of analogue circuits working in the current-mode. In this paper a new topology is presented of multifunctional frequency filter SIMO (Single Input Multiple Output) working the in currentmode. The proposed circuit is realized using four second-generation current conveyors and six passive elements. A high value of quality factor can be achieved, changeable independently of the characteristic frequency. The results of sensitivity and tolerance analyses of the proposed filter are given. The properties of the designed filter were also experimentally verified.
منابع مشابه
A New Trans-admittance-Mode Biquad Filter Suitable for Low Voltage Operation
The trans-admittance-mode (TAM) might act as a transforming bridge for voltage-mode to current-mode conversion. In this study a new low voltage operated electronically tunable TAM biquad filter structure realizing all the seven standard filtering functions namely; low-pass (LP), band-pass (BP), high-pass (HP), regular-notch (RN), low-pass-notch (LPN), high-pass-notch (HPN) and all-pass (AP) fro...
متن کاملReconfigurable Voltage Mode First Order Multifunctional Filter using Single Low Voltage Digitally Controlled CMOS CCII
The digitally controlled current conveyor has been used to realize a novel digitally controlled reconfigurable continuous time voltage mode first order multifunctional filter. The realized filter can provide first order voltage mode low pass, high pass and all pass responses. The pole frequency of the continuous time filter is directly proportional to an n-bit digital control word. The realized...
متن کاملRealization of Novel Cascadable Current-Mode All-pass Sections
This paper introduces four new resistorless circuits of first-order current-mode all-pass filter (CMAPF) based on dual-X current conveyor transconductance amplifier (DXCCTA). All the four circuits use a single DXCCTA and a capacitor for their realization. The main features of the proposed CMAPFs are: use of minimum active and passive components, resistorless realization, electronically adjustab...
متن کاملDual-Band Evanescent-Mode Substrate Integrated Waveguide Band-pass Filter for WLAN Applications
A new multi-layer substrate integrated waveguide (SIW) structure is developed to design dual-band evanescent-mode band-pass filters (BPFs). Two independent series LC circuits are implemented by incorporating metallic irises in the different layers of the structure. The combination of the metallic irises with capacitive-plates is embedded inside the SIW to independently excite two evane...
متن کاملRF Pure Current-Mode Filters using Current Mirrors and Inverters
In this paper the design method leading to the radio-frequency (RF) filters working in the pure current mode is shown. New active elements called current mirrors and inverters (CMI) are presented, a generalized variant (GCMI) is used for the design purposes, and a universal version (UCMI) is fitted to the filtering-circuit final solution. Initial autonomous circuits are derived from the full ad...
متن کامل