Fast Fourier Transform IR Characterization of Epoxy GY Systems Crosslinked with Aliphatic and Cycloaliphatic EH Polyamine Adducts
نویسندگان
چکیده
The use of fast FT-IR spectroscopy as a sensitive method to estimate a change of the crosslinking kinetics of epoxy resin with polyamine adducts is described in this study. A new epoxy formulation based on the use of polyamine adducts as the hardeners was analyzed. Crosslinking reactions of the different stoichiometric mixtures of the unmodified GY250 epoxy resin with the aliphatic EH606 and the cycloaliphatic EH637 polyamine adducts were studied using mid FT-IR spectroscopic techniques. As the crosslinking proceeded, the primary amine groups in polyamine adduct are converted to secondary and the tertiary amines. The decrease in the IR band intensity of epoxy groups at about 915 cm(-1), as well as at about 3,056 cm(-1), was observed due to process. Mid IR spectral analysis was used to calculate the content of the epoxy groups as a function of crosslinking time and the crosslinking degree of resin. The amount of all the epoxy species was estimated from IR spectra to changes during the crosslinking kinetics of epichlorhydrin.
منابع مشابه
Nano-Fe3O4 attached to Crosslinked sulfonated polyacrylamide (Cross-PAA-SO3H) as high performance catalyst for the synthesis of thiazoles under ultrasonic irradiations
Nano-Fe3O4 attached to Crosslinked sulfonated polyacrylamide (Cross-PAA-SO3H) as a superior catalyst has been utilized for the preparation of 3-alkyl-4-phenyl-1,3-thiazole-2(3H)-thione derivatives through a three-component reactions of phenacyl bromide or 4-methoxyphenacyl bromide, carbon disulfide and primary amine. The best results were gained in ethanol and we found that the reaction gave co...
متن کاملPhotocuring and thermal post-curing of a cycloaliphatic epoxide resin with a trithiol and a vinyl epoxy compound J. M. Morancho, X. Fernández-Francos, X. Ramis, J. M. Salla & À. Serra
In this work, the influence of trimethylolpropane tris-(3-mercaptopropionate) and a vinyl epoxy compound (4-vinyl-1-cyclohexene 1,2-epoxide) over the photocuring and subsequent thermal curing of an epoxy resin (CYRACURE UVR-6105) is studied. The photoinitiator used is CYRACURE UVI-6976. The techniques used in this study have been DSC (differential scanning calorimetry) and FTIR (Fourier transfo...
متن کاملFabrication of Porous Hydroxyapatite-Gelatin Scaffolds Crosslinked by Glutaraldehyde for Bone Tissue Engineering
In this study, to mimic the mineral and organic components of natural bone, hydroxyapatite[HA] and gelatin[GEL] composite scaffolds were prepared using the solvent-casting method combined with a freeze drying process. Glutaraldehyde[GA] was used as a cross linking agent and sodium bisulfite was used as an excess GA discharger. Using this technique, it is possible to produce scaffolds with mecha...
متن کاملCharacterization of CaSn(OH)6 and CaSnO3 Nanostructures Synthesized by a New Precursor
In this paper, calcium stannate nanoparticles were synthesized by a fast and simple co-precipitation procedure. For CaSnO3 preparation ammonia was used as precipitation agent. The effect of various surfactants such as cationic, anionic and neutral on the morphology of the products was investigated. By changing in Ca(Sal)2 as a new precursor different morphologies were obtained. Ligand as a capp...
متن کاملPhotocatalytic Coating Using Titania-Silica Core/Shell Nanoparticles
The photocatalytic coatings were prepared via incorporating the modified titania nanoparticles into epoxy-based inorganic-organic hybrid coatings. Titania nanoparticles were first synthesized from tetra-n-butyl titanate using sol-gel methods by two different calcination treatments, i.e., in mild condition (80°C) and 500°C. The formed anatase nanoparticles were further modified as Titania-Silica...
متن کامل