An in vitro study of the effect of spreader penetration depth on apical microleakage.
نویسندگان
چکیده
The purpose of this study was to evaluate the effect of spreader penetration depth on apical microleakage using the lateral compaction method. A total of 96 extracted maxillary central incisors were instrumented using the step-back method, and randomly divided into the following four experimental groups: A) with tug-back and spreader penetration 1 mm short of the working length; B) without tug-back and spreader penetration 1 mm short of the working length; C) without tug-back and spreader penetration to the working length; D) with tug-back and spreader penetration to the working length. Microleakage evaluation was conducted using the dye penetration method, and ANOVA test was used for statistical analysis. The results showed that there was a significant difference in the amount of microleakage between the groups with spreader penetration to the working length and the groups with spreader penetration 1 mm short of the working length. There was no significant difference between the groups with and without tug-back.
منابع مشابه
Effects of spreader penetration depth on the quality of apical seal
Effects of spreader penetration depth on the quality of apical seal Dr. M. Alaeddini* - Dr. M. Parirokh** * - Oral and Maxillofacial pathologist – Dental Research Centre – Tehran University of Medical Sciences. **- Associate professor of Endodontics Dept. – Faculty of Dentistry – Kerman University of Medical Sciences. Background and Aim: A proper root canal filling is accomplished by complete o...
متن کاملEvaluation of the Effect of Zirconia and Titanium Abutments on Microleakage of Implant-Abutment Interface Under Oblique Cyclic Loading In Vitro
Background and Aim: Oral bacteria can proliferate in the implant-abutment interface (IAI) and cause inflammation in the peri-implant tissues and adjacent bone. This study aimed to assess the effect of zirconia and titanium abutments on the microleakage of the IAI under oblique cyclic loading conditions. Materials and Methods: In this in-vitro study, 12 implant-abutment assemblies with zirconia...
متن کاملComparison of apical microleakage using Ni-Ti with stainless steel finger spreaders
INTRODUCTION The purpose of this in vitro study was to compare apical microleakage after obturation with Nickel-Titanium (NiTi) compared to Stainless Steel (SS) finger spreaders. MATERIALS AND METHODS Eighty straight single-rooted human teeth were instrumented using step-back technique. The specimens were randomly divided into four groups. The two experimental groups (n=30) and the negative c...
متن کاملمقایسه ریزنشت اپیکالی کانالهای پرشده بارزیلون/ اپی فانی، گوتاپرکای ترمافیل/ سیلر Adseal و گوتاپرکا/ سیلر Adseal
Objective: Root canal obturation is an important step in endodontic therapy aiming at achieving a complete three-dimensional seal of the canal and preventing microleakage, reentry or growth of microorganisms in the root canal system. Several techniques and materials are available for root canal filling. Achieving an apical seal is among the most important characteristics of filling materials....
متن کاملComparative Evaluation of Microleakage at the Interface of Titanium and Zirconium Abutments Following Oblique Cyclic Loading: An in vitro Study
Abstract Background and aim: Oral microbiota could proliferate the microspace between the implant and abutment, thereby cause inflammation in the peri-implant tissues and adjacent bone. This study aimed to investigate the effect of two types of abutments (zirconia and titanium) on microleakage at implant-abutment interface area under oblique cyclic loading in vitro. Materials and methods:In thi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of oral science
دوره 49 4 شماره
صفحات -
تاریخ انتشار 2007