Optimization of InGaAs/InAlAs Avalanche Photodiodes

نویسندگان

  • Jun Chen
  • Zhengyu Zhang
  • Min Zhu
  • Jintong Xu
  • Xiangyang Li
چکیده

In this paper, we report a two-dimensional (2D) simulation for InGaAs/InAlAs separate absorption, grading, charge, and multiplication avalanche photodiodes (SAGCM APDs) and study the effect of the charge layer and multiplication layer on the operating voltage ranges of APD. We find that with the increase of the thicknesses as well as the doping concentrations of the charge layer and the multiplication layer, the punchthrough voltage increases; with the increase of the doping concentrations of two layers and the thickness of the charge layer, the breakdown voltage decreases; with the increase of the thickness of the multiplication layer, the breakdown voltage first rapidly declines and then slightly rises.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Relationship of growth mode to surface morphology and dark current in InAlAs/InGaAs avalanche photodiodes grown by MBE on InP

We present the relationship between surface roughness and dark current measured for avalanche photodiodes with InGaAs absorbers and thin InAlAs multiplication layers fabricated from material grown lattice-matched to InP by molecular beam epitaxy. In particular, the leakage current at unity gain measured for sets of 125mm diameter devices was found to have an exponential dependence upon the peak...

متن کامل

Reliability Challenges of Nanoscale Avalanche Photodiodes

Figure 1 shows the general device schematics and electric field profile of an APD device. For the top-illumination APD illustrated in Figure 1, the top layer is a heavily p-doped InGaAs layer that forms Ohmic contact with the p-metal. The next is an intrinsic In0.53Ga0.47 as absorption layer, which has a band gap energy of 0.75eV, used to absorb light [5]. To achieve lattice match to InP substr...

متن کامل

1550 nm InGaAs/InAlAs single photon avalanche diode at room temperature.

An InGaAs/InAlAs Single Photon Avalanche Diode was fabricated and characterized. Leakage current, dark count and photon count measurements were carried out on the devices from 260 to 290 K. Due to better temperature stability of avalanche breakdown in InAlAs, the device breakdown voltage varied by < 0.2 V over the 30 K temperature range studied, which corresponds to a temperature coefficient of...

متن کامل

Physics of breakdown in InAlAs/InGaAs MODFETs - Device Research Conference, 1993. 51st Annual

InAlAsLlnGaAs MODFETs have achieved record high-frequency and low-noise performance. They are promising candidates for applications in microwave and lightwave communication systems. Their main weakness, however, has been their low breakdown voltage (BV) which severely limits their applications. Considerable work has focussed on improving BV of these devices. Recently, BV up to 10 V has been dem...

متن کامل

InGaAs/InAlAs Single Photon Avalanche Diode at 1550 nm

Single photon detectors sensitive to near-infrared (NIR) wavelength light are used in an increasing number of applications, such as quantum key distribution, laser detection and ranging, and integrated circuit analysis. There are many types of NIR single photon detectors, e.g. photomultiplier tube, superconducting single photon detector and single photon avalanche diode (SPAD). However, the SPA...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 12  شماره 

صفحات  -

تاریخ انتشار 2017