B. Panic Physical and Mathematical Modeling of Phenomena Proceeding with Gas – Powder Two Phase Flow through Moving Packed Bed in Metallurgical Shaft Furnaces
ثبت نشده
چکیده
A lot of metallurgical processes take places in shaft furnaces, where reacting gas carrying powders flows up in packed bed of descending metallurgical materials. Gas + powder two phase flow in fixed packed bed has been investigated by author for many years 1 . At present author undertakes the investigations with moving bed. Physical model with glass bed and glass powders was constructed. The experiments were carried out and the influences of gas velocity, type and size of powders, type and size of bed particles and powder concentration in gas were established. The conditions, in which bed hanging up appears were defined.
منابع مشابه
Mathematical modeling of a fixed bed chromatographic reactor for Fischer Tropsch synthesis
In this research, Fischer Tropsch synthesis (FTS) has been modeled in the fixed bed chromatographic reactor for the first time by applying a rather complex dispersed plug flow model for fluid phase and linear driving force (LDF) model for adsorbent. Model equations are dynamic, multi-component, non-linear and heterogeneous including reaction and adsorption simultaneously Complex kinetics fo...
متن کاملModel Investigations 3d of Gas-powder Two Phase Flow in Descending Bed with Consideration Radial Distribution of Flow
B. Panic, Department of Metallurgy, Silesian University of Technology, Katowice, Poland The results of experimental investigations concerning radial distribution of powder accumulation in bed and static pressure were presented in this paper. To realize this research physical model of gas-po wder two phase fl ow with descending bed was projected and constructed. Amounts of “dynamic” and “static”...
متن کاملMathematical Modeling of Gas Adsorption Processes in Packed Bed: The Role of Numerical Methods on Computation Time
Rigorous mathematical modeling of adsorption processes in packed beds involves time-consuming computations which are considered as the fundamental weakness of such thorough mathematical models. Thus, reducing the computation time was a key factor in improving adsorption mathematical models. In order to achieve this goal, an attempt was made to know how much using different numerical methods inf...
متن کاملImproving Three Phase Modeling of Fluidized Bed Dryer
Heat transfer phenomena in batch fluidized bed dryer have been studied and analyzed using three phase model including solid phase, interstitial gas phase and bubble phase based on Rizzi model. New correlations of heat transfer coefficient to surrounding and convection heat transfer coefficient between solid and interstitial gas are being proposed. In addition, some modifications have been d...
متن کاملImprovement of Methanol Synthesis Process through a Novel Sorption-Enhanced Fluidized-bed Reactor, Part I: Mathematical Modeling
In the first part of two section paper, a mathematical model of the fluidized bed reactor in the presence of in-situ water adsorbent for methanol synthesis is assessed. The bubbling two-phase regime is applied to model the fluidization concept. The binary adsorbent and catalyst particles system can be separated from each other based on their density difference. The heavy catalyst particles tend...
متن کامل