Design Guideline on 150W Power Supply for LED Street Lighting Design Using FL7930B and FAN7621S

ثبت نشده
چکیده

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design Guideline on 150W Power Supply for LED

This application note describes a 150W rating design guideline for LED street lighting. The application design consists of CRM PFC and LLC SRC with high power factor and high power conversion efficiency using FL7930B and FAN7621S. To verify the validity of the application board and scheme, a demonstration board 150W (103V/1.46A) AC-DC converter was implemented and its results are presented in t...

متن کامل

A Two Stage Buck Boost Converter With Isolation As A High Power Factor Supply For Power-LED Lamps

In recent years, power converters are used to get high power factor for low power applications. In this work, the design and development of a DC-DC Converter using two stage buck–boost converter with isolation operation as high-power-factor offline power supply for power-LED lamps is discussed. This converter is suitable for low power application such as a matrix LED lighting system. The advant...

متن کامل

LED Application Design Guide Using Half-Bridge LLC Resonant Converter for 160W Street Lighting

This application note describes the LED driving system using a half-bridge LLC resonant converter for high power LED lighting applications, such as outdoor or street lighting. Due to the existence of the non-isolation DC-DC converter to control the LED current and the light intensity, the conventional PWM DC-DC converter has the problem of low-power conversion efficiency. The halfbridge LLC con...

متن کامل

AN-9729 — LED Application Design Guide Using Half-Bridge LLC Resonant Converter for 100W Street Lighting

This application note describes the LED driving system using a half-bridge LLC resonant converter for high power LED lighting applications, such as outdoor or street lighting. Due to the existence of the non-isolation DC-DC converter to control the LED current and the light intensity, the conventional PWM DC-DC converter has the problem of low-power conversion efficiency. The half-bridge LLC co...

متن کامل

Single Stage Single Switch LED Driver with Improved Power Factor Correction and Soft Switching

Light Emitting Diodes (LEDs) with their current performances have been proved to be the most suitable solution for street lighting applications. Nowadays, a topic of interest in this context is the design for electronic driver in order to take the advantage of LEDs performances. However, requirements such as high power factor, long life time, accurate current control and high efficiency pose ch...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017