Influence of surface roughness on streptococcal adhesion forces to composite resins
ثبت نشده
چکیده
منابع مشابه
Influence of surface roughness on streptococcal adhesion forces to composite resins.
OBJECTIVE To determine streptococcal adhesion forces with composite resins with different surface roughness. METHODS Polishing and grinding were applied to obtain smooth (roughness 20 nm), moderately rough (150 nm) and rough (350 nm) surfaces of two orthodontic, light-cured composites. Adhesion forces between Streptococcus sanguinis and Streptococcus mutans and the composite surfaces were mea...
متن کاملComparative Evaluation of Surface Roughness of Three Different Composite Resins Following Polishing with a Two-Step Technique
Background and Aim: Nowadays, demand for same–color restorative materials, especially resin composites, is increasing. Access to the smooth surface with minimum level of surface roughness significantly results in more beauty, and the reduction of the accumulation of the plaque, gingival inflammation, and tooth discoloration. the aim of this study was surface roughness of three different composi...
متن کاملInfluence of different staining beverages on color stability, surface roughness and microhardness of silorane and methacrylate-based composite resins.
AIM To investigate the influence of different staining beverages on color stability, surface roughness and microhardness of silorane and methacrylate-based composite resins. MATERIALS AND METHODS Three different composite resins (Filtek Silorane, Filtek P60, Filtek Supreme XT) were tested. Thirty cylindrical specimens (10 × 2 mm) per material were prepared and polished with a series of alumin...
متن کاملAdherence of Streptococcus mutans to Fiber-Reinforced Filling Composite and Conventional Restorative Materials
OBJECTIVES.: The aim was to investigate the adhesion of Streptococcus mutans (S. mutans) to a short glass fibers reinforced semi-IPN polymer matrix composite resin. The effect of surface roughness on adhesion was also studied. For comparison, different commercial restorative materials were also evaluated. MATERIALS AND METHODS.: Experimental composite FC resin was prepared by mixing 22.5 wt% of...
متن کاملSurface roughness of composite resins subjected to hydrochloric acid.
The purpose of this study was to determine the influence of hydrochloric acid on surface roughness of composite resins subjected to brushing. Sixty samples measuring 2 mm thick x 6 mm diameter were prepared and used as experimental units. The study presented a 3x2 factorial design, in which the factors were composite resin (n=20), at 3 levels: microhybrid composite (Z100), nanofilled composite ...
متن کامل