Effect of Fiber Surface and Mechanical Properties on the Stiffness and Strength of Medium- Density Fiberboard
نویسندگان
چکیده
The mechanical properties of wood-based composites are dependent upon the properties of the wood components (e.g. wood fibers, wood strands) and the manner in which they are combined. The relationship between fiber mechanical properties and fiber-based composites has been discussed in several publications, but is best described in Page et al. (1977). This paper will focus primarily on the influence of fiber physical and mechanical properties on the structural performance of medium density fiberboard (MDF).
منابع مشابه
Relationship between Fiber Furnish Properties and the Structural Performance of MDF
Ab&act The structural performance of medium density fiberboard (MDF) is attributable to three primary variables which are: physical and mechanical properties of individual wood fibers; fiber-to-fiber stress transfer; and fiber orientation. These origins of fiber properties and stress transfer can be traced to the fiber generation method wherein fiber orientation is associated with mat formation...
متن کاملUtilisation possibilities of textile waste for the production of medium density fiberboard
Background and Objective: Nowadays, in metropolitan areas, principled and hygienic waste management is very important. Recycling is one of the most appropriate options in waste management. Hereof, the present study was aimed to investigate the possibility of using textile waste fibers in the manufacture of Medium Density Fiberboard (MDF). Materials and Methods: This experimental study was perf...
متن کاملEffect of Nanosilver on the Rate of Heat Transfer to the Core of the Medium Density Fiberboard Mat
Effect of nanosilver (NS) on the heat-transferring rate to the core section of medium density fiberboard (MDF) mat was studied here. A 400 ppm aqueous nanosilver suspension was used at three consumption levels of 100, 150, and 200 mL/kg, based on the weight of dry wood fibers; the results were then compared with the control MDF panels. The size range of nanosilver was 30-80 nm. Results showed t...
متن کاملEffect of Nanosilver on the Rate of Heat Transfer to the Core of the Medium Density Fiberboard Mat
Effect of nanosilver (NS) on the heat-transferring rate to the core section of medium density fiberboard (MDF) mat was studied here. A 400 ppm aqueous nanosilver suspension was used at three consumption levels of 100, 150, and 200 mL/kg, based on the weight of dry wood fibers; the results were then compared with the control MDF panels. The size range of nanosilver was 30-80 nm. Results showed t...
متن کاملThe effect of press temperature on properties of medium density fiberboard produced from Eucalyptus camaldulensis fibers
The target of this study was to investigate the possibility of MDF productionfrom Eucalyptus camaldulensis wood. MDF fibers were produced applying threelevels of steaming time. Laboratory MDF boards were produced using thegenerated fibers and different pressing temperature and time. Physical andmechanical properties of MDF panels were measured using relevant EU testmethods and were statisticall...
متن کامل