Ferrate(VI) oxidation of zinc-cyanide complex.
نویسندگان
چکیده
Zinc-cyanide complexes are found in gold mining effluents and in metal finishing rinse water. The effect of Zn(II) on the oxidation of cyanide by ferrate(VI) (Fe(VI)O(4)(2-), Fe(VI)) was thus investigated by studying the kinetics of the reaction of Fe(VI) with cyanide present in a potassium salt of a zinc cyanide complex (K(2)Zn(CN)(4)) and in a mixture of Zn(II) and cyanide solutions as a function of pH (9.0-11.0). The rate-law for the oxidation of Zn(CN)(4)(2-) by Fe(VI) was found to be -d[Fe(VI)]/dt=k[Fe(VI)][Zn(CN)(4)(2-)](0.5). The rate constant, k, decreased with an increase in pH. The effect of temperature (15-45 degrees C) on the oxidation was studied at pH 9.0, which gave an activation energy of 45.7+/-1.5kJmol(-1). The cyanide oxidation rate decreased in the presence of the Zn(II) ions. However, Zn(II) ions had no effect on the cyanide removal efficiency by Fe(VI) and the stoichiometry of Fe(VI) to cyanide was approximately 1:1; similar to the stoichiometry in absence of Zn(II) ions. The destruction of cyanide by Fe(VI) resulted in cyanate. The experiments on removal of cyanide from rinse water using Fe(VI) demonstrated complete conversion of cyanide to cyanate.
منابع مشابه
Destruction of cyanide and thiocyanate by ferrate [Iron(VI)]
A cyanide-laden effluent of the gold mining industry must be treated before it can be released to the aquatic environment. Current treatment methods such as natural degradation, sulfur based, hydrogen peroxide, ozonation, and alkaline chlorination are not adequate for meeting newer treatment standards. A new chemical oxidant that utilizes iron in the +6 oxidation state, ferrate [Fe(VI)] was stu...
متن کاملFerrate(VI) Oxidation of Aqueous Cyanide
The rates of oxidation of cyanide with Fe(VI) were measured as a function of pH (8.0-12) and temperature (1530 °C). The reaction was found to be first order for each reactant. The rates decrease with increasing pH. The energy of activation was found to be 38.9 ( 1.0 kJ mol-1 at pH 9.0. The removal of cyanide by oxidation with Fe(VI) was studied at pH 7.5, 9.0, and 12.0. Fe(VI) removal efficienc...
متن کاملHydrogen sulfide and organic compounds removal in municipal wastewater using ferrate (VI) and ultraviolet radiation
Background: In this study, ferrate (VI) and ultraviolet (UV) radiation were employed to remove hydrogen sulfide from municipal wastewater resulting in a reduction in chemical oxygen demand (COD). Although ferrate (VI) and UV have been used individually for the removal of a few pollutants from urban and industrial wastewater, there exists no study to investigate the effectiveness of si...
متن کاملDegradation of endocrine disrupting chemicals in aqueous solution by interaction of photocatalytic oxidation and ferrate (VI) oxidation.
In this study, the degradation of bisphenol A in aqueous suspension by interaction of photocatalytic oxidation and ferrate(VI) oxidation was investigated under different conditions. The results indicate that the formation of Fe(V) and Fe(IV) is in the photocatalytic reduction of Fe(VI) by electron (ecb-) on the surface of TiO2. The oxidation efficiency of the photocatalytic oxidation in the pre...
متن کاملDegradation Effect of Sulfa Antibiotics by Potassium Ferrate Combined with Ultrasound (Fe(VI)-US)
Sulfa antibiotics are a family of typical broad-spectrum antibiotics, which have become one of the most frequently detected antibiotics in water, posing a great threat to human health and ecosystem. Potassium ferrate is a new type of high-efficiency multifunctional water treatment agent, collecting the effects of oxidation, adsorption, flocculation, coagulation, sterilization, and deodorization...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemosphere
دوره 69 5 شماره
صفحات -
تاریخ انتشار 2007