Journal of Nanoscience with Advanced Technology Nanoengineering of Hybrid Lightweight Cellulosic Fibre Foams for better Flame Resistance
نویسندگان
چکیده
We studied the flame propagation and combustion properties of a lightweight fibrous foam produced from a layered double hydroxides (LDH) modified thermomechanical pulp fibres. The in situ synthesis of Mg-Al LDH with pulp fibres was engineered to include both micron and nano-sized particles. The method allowed loading the fibres with LDH up to 34% (w/w). Observed pyrolytic effects included 60% reduction in CO2 production rate, and similar reductions in peak heat release rate (PHRR) and in amount of soot during the oxidative pyrolysis. The in situ synthesised LDH particles shielded the fibres from external heat by reducing the rate of oxidation and liberation of volatile gases. Effective charring was observed at the interphase of LDH nanoparticles and organic material.
منابع مشابه
Failure Mode and Analysis of the Bonded/bolted Joints between a Hybrid Fibre Reinforced Polymer and Aluminium Alloy
Composites are being used extensively in several engineering applications. However, the efficiency of the joints used in joining composites and metals can be improved. To move towards a sustainable and environment friendly future, natural fibre composite material was used. Towards the above objective, research work was carried out for the assembly between a composite and aluminium. Three differ...
متن کاملFlame-Retardant Cellulosic Fiber Nanocomposite Based on Aluminum Tetraborate and Aluminum Tungstate
متن کامل
Processing and Characterization of AA2024/Al2O3/SiC Reinforces Hybrid Composites Using Squeeze Casting Technique
The present requirement of automobile industry is seeking lightweight material that satisfices the technical and technological requirements with better mechanical and tribological characteristics. Aluminium matrix composite ( AMC ) materials meet the requirements of the modern demands. AMCs are used in automotive applications as engine cylinders, pistons, disc and drum brakes. This paper inves...
متن کاملNanoscience and Nano Engineering in Concrete Advances , A Review
This paper reviews some progressive studies and innovations in cement and concrete materials in nano field. Due to the widespread acceptance of the special properties of nano materials and using them for engineering concrete performance, understanding and directing their properties are not achievable without instructing concepts and investigating interactions among components. Due to ach...
متن کاملTensile and Flexural Analysis of a Hybrid Bamboo/Jute Fiber-reinforced Composite with Polyester Matrix as a Sustainable Green Material for Wind Turbine Blades
Recently, there has been a fast growth in research and investigation in the natural fibre composite due to the advantages of these materials, such us low environmental impact, low cost and good mechanical properties compared to synthetic fibre composites. Much effort has gone into increasing the mechanical performance and applications of natural fibes. This paper examines the mechanical propert...
متن کامل