3D Packaging Materials based on Graphite Nanoplatelet and Aluminum Nitride Nanocomposites
نویسندگان
چکیده
Nanostructured composites with efficient percolation networks are promising candidates for packaging materials due to their high thermal conductivity. In this study, we investigate the thermal conductivity of composites consisting of a combination of exfoliated graphene nanoplatelet (xGNP) and aluminum nitride (AlN) particles in polyvinylidine fluoride (PVDF) matrix. The surfaces of the AlN particles are treated with silane to reduce the interfacial thermal resistance at particle-matrix boundary. Samples with 50 vol% AlN and 2 vol% xGNP showed an order of magnitude enhancement in thermal conductivity. AlN composites (with and with out xGNP) showed evidence of effective percolation pathways for AlN vol % over ~40.
منابع مشابه
Modeling and Characterization of a Graphite Nanoplatelet/Epoxy Composite
A micromechanical modeling procedure is developed to predict the viscoelastic properties of a graphite nanoplatelet/epoxy composite as a function of volume fraction and nanoplatelet diameter. The predicted storage and loss moduli from the model are compared to measured values from the same material using Dynamical Mechanical Analysis, nanoindentation, and tensile tests. In most cases, the model...
متن کاملEnhancement of toughness and wear resistance in boron nitride nanoplatelet (BNNP) reinforced Si3N4 nanocomposites
Ceramics have superior hardness, strength and corrosion resistance, but are also associated with poor toughness. Here, we propose the boron nitride nanoplatelet (BNNP) as a novel toughening reinforcement component to ceramics with outstanding mechanical properties and high-temperature stability. We used a planetary ball-milling process to exfoliate BNNPs in a scalable manner and functionalizes ...
متن کاملElectrical Properties of Composite Materials with Electric Field-Assisted Alignment of Nanocarbon Fillers
The article reports about electric field-induced alignment of the carbon nanoparticles embedded in epoxy matrix. Optical microscopy was performed to consider the effect of the electric field magnitude and configuration, filler morphology, and aspect ratio on alignment process. Characteristic time of aligned network formation was compared with modeling predictions. Carbon nanotube and graphite n...
متن کاملNitride Based Ceramic Nanocomposites with Multifunctionality
Two types of Aluminum nitride (AlN) based ceramic nanocomposite with multifunctionality were investigated to improve machinability or electrical conductivity of AlN ceramics with high thermal conductivity. The AlN/BN nanocomposite was fabricated by pressureless sintering AlN-BN composite powder, which was prepared by reducing and heating AlN particles coated with a mixture of boric acid, urea a...
متن کاملPackaging Technologies for High Temperature Electronics and Sensors
This paper reviews ceramic substrates and thick-film metallization based packaging technologies in development for 500°C silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-...
متن کامل