Oxidation Enthalpies for Reduction of Ceria Surfaces
نویسندگان
چکیده
The thermodynamic properties of surface ceria were investigated through equilibrium isotherms determined by flow-titration and coulometric-titration measurements on high-surface-area ceria and ceria supported on La-modified alumina (LA). While the surface area of pure ceria was found to be unstable under redox conditions, the extent of reduction at 873 K and a P(O2) of 1.6x10-26 atm increased with surface area. Because ceria/LA samples were stable, equilibrium isotherms were determined between 873 and 973 K on a 30-wt% ceria sample. Oxidation enthalpies on ceria/LA were found to vary with the extent of reduction, ranging from -500 kJ/mol O2 at low extents of reduction to near the bulk value of -760 kJ/mol O2 at higher extents. To determine whether +3 dopants could affect the oxidation enthalpies for ceria, isotherms were measured for Sm+3-doped ceria (SDC) and Y+3-doped ceria. These dopants were found to remove the phase transition observed in pure ceria below 973 K but appeared to have minimal effect on the oxidation enthalpies. Implications of these results for catalytic applications of ceria are discussed.
منابع مشابه
Oxidation entropies and enthalpies of ceria–zirconia solid solutions
The thermodynamic redox properties for a series of ceria–zirconia solid solutions have been measured by determining their oxidation isotherms between 873 and 1073 K. Isotherms were obtained using Coulometric titration and using O2 titration of samples equilibrated in flowing mixtures of H2 and H2O. Samples having the following compositions were studied after calcinations at 973 and 1323 K: CeO2...
متن کاملDirect CO Oxidation by Lattice Oxygen on Zr-Doped Ceria Surfaces
Systematic density-functional calculations have been performed to address an important issue for CO oxidation on redox ceria: the role of lattice oxygen. One major findings is that CO easily grasps one lattice oxygen atom to form CO2 and CO2 on CeO2 (111) and Ce0.75Zr0.25O2 (111) with small activation energies. Zr dopants facilitate the reduction of Ce to Ce and hence weaken the Ce–O bonds, whi...
متن کاملA Thermodynamic Investigation of the Redox Properties of Ceria-Titania Mixed Oxides
Ceria-titania solutions with compositions of Ce0.9Ti0.1O2 and Ce0.8Ti0.2O2 were prepared by the citric-acid (Pechini) method and characterized using x-ray diffraction (XRD) for structure, coulometric titration for redox thermodynamics, and water-gas-shift (WGS) reaction rates. Following calcination at 973 K, XRD suggests that the mixed oxides exist as single-phase, fluorite structures, although...
متن کاملEffect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors
The CO preferential oxidation (PrOx) is one of the critical steps in hydrogen production and purification for Polymer Electrolyte Membrane Fuel Cell (PEMFC). This reaction was investigated in the presence of excess hydrogen over Cu/CeO2, Pt/CeO2 and Cu-Pt/CeO2 catalysts. The ceria supports was prepared via precipitation method and Cu-Pt/CeO2 catalyst was synthesized by sequential impregnation o...
متن کاملOptimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst
Nanocrystalline ceria has been considered as support for carbon monoxide preferentially oxidation. In this study ceria was prepared by precipitation method and the effects of preparation conditions, such as pH of solution (8-10), aging time (1-12 hr), drying temperature (80-120 °C), calcination time (2-6 hr) and temperature (400-600 °C) were investigated on ceria synthesized powders properties....
متن کامل