Elastic Phase-Strain Distribution in a Particulate-Reinforced Metal-Matrix Composite Deforming by Slip or Creep
نویسنده
چکیده
The macroscopic load-bearing capability of a composite is directly related to the strain partitioning due to load transfer between the component phases. Using neutron diffraction, the elastic mean phase strains were measured during in-situ loading of a Cu-15 vol pct Mo particulatemetal-matrix composite (MMC) at 25 8C, 300 8C, and 350 8C. The degree of load sharing at each temperature was compared to finite-element (FE) results. The load transfer from the matrix to reinforcement is both qualitatively and quantitatively different at low and high temperatures. When the matrix creeps, load transfer is less effective than when the matrix deforms by slip; also, load transfer at elevated temperatures decreases with increasing applied stress.
منابع مشابه
Fabrication of TiC particulate reinforced Ni-50Fe super alloy matrix composite powder by mechanical alloying
Mechanical alloying is a powder metallurgy processing technique involving cold welding, fracturing, and rewelding of powder particles in a high-energy ball mill. In this work, NiFe-TiC composite powders were prepared by mechanical alloying process using planetary high-energy ball mill. The effect of TiC addition by weight percent on the NiFe solid solution formation, grain size, lattice paramet...
متن کاملCreep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels
This study investigates the time-dependent long-term creep strain in a composite cylinder made of glass/vinylester with a unidirectional ply. The cylinder is subjected to an internal pressure and the boundary condition is free–free and acts as thermal insulation. The classical lamination theory (CLT) is used to derive the governing equations as a second-order equation to determine the radial, c...
متن کاملEffects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells
Due to the importance effect of magnetic field on the history of long-term radial and circumfer-ential creep strain and radial displacement for a three-phase nano-composite exposed to an internal pressure and placed uniform temperature, the present article subject has been pro-posed. Three-phase nano-composite made of single-walled carbon nano tubes (SWCNTs)/ glass fiber (GF)/vinylester used to...
متن کاملCreep Evolution Analysis of Composite Cylinder Made of Polypropylene Reinforced by Functionally Graded MWCNTs
Polypropylene is one of the most common, fastest growing and versatile thermoplastics currently used to produce tanks and chemical piping systems. Even at room temperature creep is considerable for polypropylene products. The creep behavior of strains, stresses, and displacement rates is investigated in a thick-walled cylinder made of polypropylene reinforced by functionally graded (FG) multi-w...
متن کاملThermal Elastic-plastic Stress Analysis of Steel Fiber Reinforced Aluminum Metal-matrix Composite Arches
A thermal elastic-plastic stress analysis is carried out on steel fiber reinforced aluminum metal-matrix composite arch under uniform temperature distribution. The arch is fixed at both ends. The composite material is assumed to be strain hardening linearly. First yielding temperature, thermal residual stresses and the distribution of these stresses under thermal loading are investigated by usi...
متن کامل