A Unique Instrumentation System Design for Measuring Forces on a Rotating Shaft
نویسندگان
چکیده
The design and construction of instrumentation systems require a broad background in many disciplines. The system design in this paper was further complicated by the subject of the measurement. Attempting to measure the bending forces on a rotating shaft is difficult in the extreme. We believe that the approach taken in the design of this Instrumentation and Measurement System is unique and has broader applications than those described by this paper. There is significant opportunity to further the performance of the Instrumentation and Measurement system as well as the post processing analysis tools.
منابع مشابه
New Approach to Instability Threshold of a Simply Supported Rayleigh Shaft
The main goal of this research is to analyse the effect of angular velocity on stability and vibration of a simply supported Rayleigh rotating shaft. To this end, non-dimensional kinetic and potential energies are written while lateral vibration is considered. Finite element method is employed to discrete the formulations and Linear method is applied to analyse instability threshold of a rotati...
متن کاملAnalytical Solution for Electro-mechanical Behavior of Piezoelectric Rotating Shaft Reinforced by BNNTs Under Non-axisymmetric Internal Pressure
In this study, two-dimensional electro-mechanical analysis of a composite rotating shaft subjected to non-axisymmetric internal pressure and applied voltage is investigated where hollow piezoelectric shaft reinforced by boron nitride nanotubes (BNNTs). Composite structure is modeled based on piezoelectric fiber reinforced composite (PFRC) theory and a representative volume element has been cons...
متن کاملVibration Analysis of Rotating Shaft with Loose Disk
In this paper energy method is used to calculate rotor response with loose rotating disk on it. System equation of motion is obtained based on energy method and Lagrange equation. Mathematical modeling of loose disk in a rotor bearing system has resulted in terms similar to unbalance and gyroscopic effect in the system equation of motion. The effect of loose disk axial position and orthotropic ...
متن کاملاندازهگیری پیچش استاتیکی و دینامیکی محورها- کاربرد ویژه در پایش ارتعاشات پیچشی
Strain gage mounted on the surface of the shafts with specified directions are one of the common methods for measurement of the torsion in shafts. The most critical problem in utilization of this method, particularly in the online monitoring of torsional vibration and instantaneous torque in rotary systems, is due to its signal transfer process. In this paper, a simple, practical and feasible m...
متن کاملInvestigating Nonlinear Vibration Behavior of Rotors with Asymmetry Shaft Considering Misalignment
In this paper, the nonlinear vibration behavior of a rotor with asymmetric shaft considering misalignment is studied. The system consists of a rectangular shaft and a disk which is connected to a motor through a flexible coupling. In order to consider higher order deformations, nonlinear Bernoulli beam is used for modeling the shaft. Gibbons’ equations are utilized to apply misaligned coupling ...
متن کامل