Sound velocity measurement using transfer function method
نویسندگان
چکیده
Abstract The transfer function of a piezoelectric transducer, buffer rod and sample assembly is used to measure the sound velocity of solid materials. From the recorded transfer function, pulse echo patterns at frequencies of the passband of the input signal are reproduced after convoluting with monochromatic RF input signals. The time delay is obtained by performing pulse echo overlap and phase comparison measurements on reproduced signals. Results for a single crystal of MgO along the [100] direction from this study are in good agreement with previous measurements but have the advantage of offline data analysis and fast data acquisition.
منابع مشابه
Investigation of volume velocity source based on two-microphone method for measuring vibro-acoustic transfer fuctions (bn0439)
Measurement of transfer functions is required for most applications dealing with source-path-contribution techniques often called transfer path analysis. Here the transfer function, typically measured as Frequency Response Function (FRF), takes the role of connecting an input (eg source position) with an output (eg receiver position). In this paper we will further investigate a previously descr...
متن کاملHow to precisely measure the volume velocity transfer function of physical vocal tract models by external excitation
Recently, 3D printing has been increasingly used to create physical models of the vocal tract with geometries obtained from magnetic resonance imaging. These printed models allow measuring the vocal tract transfer function, which is not reliably possible in vivo for the vocal tract of living humans. The transfer functions enable the detailed examination of the acoustic effects of specific artic...
متن کاملFlow forcing techniques for numerical simulation of combustion instabilities
Investigation of combustion instabilities in gas turbine combustors require the knowledge of flame transfer functions. Those can be obtained by experimental measurement or by Large Eddy Simulations (LES). Since calculations are usually limited to a portion of the whole combustor, boundary conditions are of crucial importance. It is common practice to inject acoustic perturbations for the flame ...
متن کاملUsing mechanical-acoustical reciprocity for diagnosis of structure borne sound in vehicles
The low frequency interior noise in cars is for a large part the result of structure borne excitation. The transfer of the structure borne sound involves a large number of components of the engine suspension, wheel suspension and chassis which are all potentially contributing to the overall noise level. This process can be analyzed through acombination of transfer function measurementswith oper...
متن کاملEstimation of Sound Source Direction Using Parabolic Reflection Board
This paper presents a new sound-source-direction estimation method using only a single microphone with a parabolic reflection board. In our previous work [1], we proposed GMM (Gaussian Mixture Model) separation for estimation of the sound source direction, where the observed (reverberant) speech is separated into the acoustic transfer function and the clean speech GMM. However, the previous met...
متن کامل