Rigid Body Vibrations of Compressors
نویسندگان
چکیده
منابع مشابه
Effects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE)
Centrifugal compressors produce high pressure ratio and rotate at speeds. So, a tiny unbalance can produce severe vibration. In this paper, effects of impeller gap on rotor vibration in a high speed centrifugal compressor is investigated. For this purpose, a numerical and experimental analysis are carried out. The moving reference frame method in FLUENT software is used for modeling of geometri...
متن کاملExperimental Analysis of Screw Compressor Noise and Vibration
Very few reports have been presented to date on the noise and vibrational characteristics of oil injected screw compressors. This time. a series of extensive experimental analysis is performed. It includes the measurements and analysis of compressor casing vibrations. rotor shafts vibrations, torsional <rotational) vibrations. suction and discharge gas pulsations. pressure trans~ ient in one th...
متن کاملInnovation in Reciprocating Compressors by Technology Transfer From Modern Combustion Engines
In the paper the weak points of today's reciprocating compressors arc described. Referring to latest internal combustion engine technologies and improvements, some possible application on reciprocating compressors will be described and discussed as: • Application of advanced Electromechanical Valves (EMV) with fully variable valve actuation in order to increase compressor speed ("downsizing") a...
متن کاملVibration-Acoustics Study of R410A Rotary Compressors
This paper demonstrates a typical process to investigate the vibro-acoustic behavior of R410A rotary compressors. The compressor shell is usually the main noise radiator in a rotary compressor. However, the accumulator shell can be a significant noise source as well, although its size is relatively small. Sound performance of a rotary compressor is affected not only by the dynamic characteristi...
متن کاملBoundary Feedback Stabilization of a Nonlinear Flexible Gantry Manipulator Using Disturbance Observer
This paper aims to develop a boundary control solution for a single-link gantry robot manipulator with one axis of rotation. The control procedure is considered with link’s transverse vibrations while system undergoes rigid body nonlinear large rotation and translation. Initially, based on Hamilton principle, governing equations of hybrid motions as a set of partial differential equations...
متن کامل