The first bulk nanostructured metal
نویسنده
چکیده
Nanotechnology has become an overused adjective, but there has been justified excitement in the context of structural materials. A class of iron alloys has been discovered in which a high density of strong interfaces can be created by heat-treatment alone. The packing of interfaces is so large, and the fact that there is an intrinsic work hardening mechanism in the structure, leads to remarkable properties. The genesis of this structure, its commercialization, the new science associated with the discovery, and its limitations are all explored in this short review.
منابع مشابه
Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite
Mechanical alloying and vacuum sintering have been used to produce bulk nanostructured Ti5Si3 and Ti5Si3-15Wt.% Al2O3 nanocomposite. X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to study the microstructural characteristics of the samples. Indentation method was used to calculate hardness, elastic modulus and fracture toughness ...
متن کاملBulk nanostructured thermoelectric materials: current research and future prospects
Thermoelectrics have long been recognized as a potentially transformative energy conversion technology due to their ability to convert heat directly into electricity. Despite this potential, thermoelectric devices are not in common use because of their low efficiency, and today they are only used in niche markets where reliability and simplicity are more important than performance. However, the...
متن کاملSynthesis of Low-Melting Metal Oxide and Sulfide Nanowires and Nanobelts
The bulk nucleation and basal growth of semiconducting nanowires from molten Ga pools has been demonstrated earlier using oxygen/hydrogen plasma over molten Ga pools. Herein, we extend the above concept for bulk synthesis of oxide and sulfide nanowires of low-melting metal melts such as Sn and In. Specifically, nanowires of b-Ga2O3, b-In2O3, SnO2, a-Ga2S3, and b-In2S3 were synthesized using dir...
متن کاملAccelerated sintering in phase-separating nanostructured alloys
Sintering of powders is a common means of producing bulk materials when melt casting is impossible or does not achieve a desired microstructure, and has long been pursued for nanocrystalline materials in particular. Acceleration of sintering is desirable to lower processing temperatures and times, and thus to limit undesirable microstructure evolution. Here we show that markedly enhanced sinter...
متن کاملElectrochemical Preparation and Characterization of Mn5O8 Nanostructures
Electrochemical synthesis followed by heat-treatment is a facile and easy method for preparation of nanostructured metal oxides. Herein we report nanostructured Mn5O8 prepared through pulse cathodic deposition followed by heat-treatment for the first time. For the preparation of Mn5O8 nanorods, pulse cathodic electrodeposition was first done from 0.005M Mn(NO3)2 at the current density of 5 mA c...
متن کاملHollow Nanostructured Anode Materials for Li-Ion Batteries
Hollow nanostructured anode materials lie at the heart of research relating to Li-ion batteries, which require high capacity, high rate capability, and high safety. The higher capacity and higher rate capability for hollow nanostructured anode materials than that for the bulk counterparts can be attributed to their higher surface area, shorter path length for Li(+) transport, and more freedom f...
متن کامل