Interleaf Active Documents
نویسندگان
چکیده
Interleaf 6 (I6) is the document creation component of Interleaf’s document management software. It was originally designed for the creation of technical manuals that could be hundreds of thousands of pages in length. Such complex documents influenced the software’s requirements, not just in performance and quantity handling, but also in its ability to address several organization and production workflow issues regarding documentation. One of the things done to address such requirements was to build a highly extensible system—one that could be customized to fit the specific needs of a particular site. One goal of this extensibility when it was designed in 1989 was the ability to create active documents and document-based applications.
منابع مشابه
Feasibility analysis of inter-laminar toughening for improving delamination resistance
This letter discusses the effect of bonding energy on the delamination resistance of laminate composites using a ductile interleaf. The mechanism and methods for interleaf toughening are reviewed and the improvement in delamination resistance discussed. The bonding energy between the ductile interleaf polymer and the fibers as well as between the ductile interleaf polymer and the brittle matrix...
متن کاملTime-interleaved imaging of arbitrary scan planes applied to real-time speech MRI
yellow and gray colors, respectively. The spiral interleaf index is indicated by the number within each block. This shows 4-interleaf case, and 13-interleaf spiral was used in the in-vivo experiments. (a) Temporal ordering of the slice and spiral interleaf. Sliding window reconstruction for (b) slice 1 and (c) slice 2. Frames 1, 2, and 3 in (b) and (c) are simultaneous, for all practical purposes.
متن کاملEffect of Deep Penetration of Interleaf on Delamination Resistance in GFRP
The problem of improving the delamination resistance and toughness of laminate fiberreinforced composites especially for the drop-off structure is receiving considerable attention with the increasing need and application in industries. A hot melt-bonding process is developed to bond glass fabric laminates and the thermoplastic (TP) polysulfone (PSU) interleaf prior to the vacuum assisted resin ...
متن کاملApproximated MLC shape matrix decomposition with interleaf collision constraint
Shape matrix decomposition is a subproblem in radiation therapy planning. A given fluence matrix A has to be decomposed into a sum of shape matrices corresponding to homogeneous fields that can be shaped by a multileaf collimator (MLC). We solve the problem of minimizing the delivery time for an approximation of A satisfying certain prescribed bounds, under the additional condition that the use...
متن کاملEvaluation of a dual-level four-bank micro multileaf collimator in reducing dose undulation, leakage, and transmission
This study was to evaluate the reduction of dose undulation at the field edge, gap leakage and interleaf transmission by utilizing a dual-level four-bank micro multileaf collimator (mMLC) and compare with standard MLC. Method and Materials: A 6MV Varian 600C linear accelerator has been collimated with a dual-level fourbank mMLC. The dual mMLC consists of four banks of leaves with upper and lowe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Electronic Publishing
دوره 7 شماره
صفحات -
تاریخ انتشار 1994