Fast estimation of the phase diagram of a binary system using infrared thermography
نویسندگان
چکیده
Arial, 9pt, bold) A method based on infrared thermography for fast estimation of the phase diagram of solid-liquid binary systems has been developed. The method involves heating simultaneously a set of small crystals of a system A/B, with compositions ranging from 0%B/(A+B) to 100%B/(A+B), and to observe their thermal behavior with an infrared camera. Recorded data are then analyzed by Singular Value Decomposition techniques to identify liquidus and solidus lines. Different binary systems has been investigated and the results achieved have been compared with the phase diagrams determined by standard DSC testing, as well as with the phase diagrams predicted by thermodynamic modeling.
منابع مشابه
Experimental Detection of Composite Delamination Damage based on Ultrasonic Infrared Thermography
An experimental setup is designed to detect composite delamination damage based on ultrasonic infrared thermography. The ultrasonic infrared thermography system is composed by ultrasonic excitation system, infrared thermal imager and data acquisition system and two damaged composite plate specimens are produced in the experiment. The image processing methods including thresholding, filters, edg...
متن کاملHarmonics Estimation in Power Systems using a Fast Hybrid Algorithm
In this paper a novel hybrid algorithm for harmonics estimation in power systems is proposed. The estimation of the harmonic components is a nonlinear problem due to the nonlinearity of phase of sinusoids in distorted waveforms. Most researchers implemented nonlinear methods to extract the harmonic parameters. However, nonlinear methods for amplitude estimation increase time of convergence. Hen...
متن کاملHydrothermal Assisted Sol-Gel Process on Binary Mixtures of Aluminum and Titanium Alkoxides: A Novel Route for the Fabrication of Single Phase Tialite
Combination of sol-gel and hydrothermal routes in the metal alkoxide binary system of Al(OR)3-Ti(OR)4 (R= -CH(CH3)2 or -CH2CH2OCH3) were investigated to prepare single phase aluminum titanate (tialite). The effects of various parameters, such as hydrothermal processing temperature, solvent polarity and the type of alkoxide precursor, in phase development of the product powders have been investi...
متن کاملNondestructive Evaluation of Plexiglas Materials Using Lock-in and Pulse Phase Infrared Thermography
− Lock-in and pulse phase infrared thermography measurement techniques have been exploited for quantitative assessment of subsurface defects in a reference specimen made of Plexiglas. Radiometric thermal images were post-processed using a contrast approach in the frequency domain, allowing defect depth location to be resolved with a relative combined standard uncertainty of about 7% for thickne...
متن کاملFramework for estimating tumour parameters using thermal imaging
BACKGROUND & OBJECTIVES Non-invasive and non-ionizing medical imaging techniques are safe as these can be repeatedly used on as individual and are applicable across all age groups. Breast thermography is a non-invasive and non-ionizing medical imaging that can be potentially used in breast cancer detection and diagnosis. In this study, we used breast thermography to estimate the tumour contour ...
متن کامل