Polishing of polycrystalline diamond by the technique of dynamic friction, part 3: Mechanism exploration through debris analysis

نویسندگان

  • Y. Chen
  • I. Zarudi
چکیده

This paper investigates the mechanisms of material removal in dynamic friction polishing of polycrystalline diamond composites through the analysis of polishing-produced debris. The specimens used were PCD compacts composed of diamond and silicon carbide. In order to uncover the debris’ structure, high-resolution transmission electron microscopy (HRTEM), electron diffraction and electron energy loss spectroscopy (EELS) were used. Additionally, the density and the sp to sp ratio in the hybridized carbon materials of the debris were estimated from the EELS spectra. It was found that the debris were mainly of amorphous structure and consisted of different forms of carbon, silicon oxide/carbide, iron oxides, etc. The results show that during polishing, the diamond has transformed to nondiamond carbon, and silicon carbide to amorphous silicon carbide/oxide. r 2007 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Polishing of polycrystalline diamond by the technique of dynamic friction. Part 2: Material removal mechanism

This paper investigates the material removal mechanisms of PCD using the dynamic friction polishing technique. Scanning electron microscopy, energy dispersive X-ray, X-ray diffraction and Raman spectroscopy were used to identify the mechanisms by analyzing the specimen surfaces and debris produced by polishing. It was found that the material removal occurred in a rather complex way, which can b...

متن کامل

Polishing of polycrystalline diamond by the technique of dynamic friction—Part 5: Quantitative analysis of material removal

This investigation aims to develop a quantitative model to estimate the material removal of polycrystalline diamond composites (PCDCs) by dynamic friction polishing. The model accounts for the contributions from the constitutive characteristics and thermal properties of the materials and the key polishing parameters. It was found that the material removal was dominated by six dimensionless vari...

متن کامل

Polishing of polycrystalline diamond by the technique of dynamic friction, part 4: Establishing the polishing map

Through a systematic experimental investigation into the polishing of polycrystalline diamond composites by the dynamic friction technique, this paper identified three major regimes of polishing conditions: the regime capable of a low material removal, that enabling a safe, high removal processing, and that of an unsafe but ultra-high material removal. The study concluded that a higher polishin...

متن کامل

Polishing of polycrystalline diamond by the technique of dynamic friction, part 1: Prediction of the interface temperature rise

This paper investigates the interface temperature rise in polishing a polycrystalline diamond (PCD) surface. First, the Greenwood– Williamson’s statistical asperity model is applied to characterise the surface roughness of a PCD specimen. The result is then used to estimate the contact area and total number of contact asperities under an applied polishing load. The heat generated is taken as th...

متن کامل

Morphological Characterization of Combustion Deposited Diamond Crystals and Films

Single crystals and polycrystalline diamond films of several thicknesses were deposited using oxygen/acetylene combustion flame technique. The substrate used was pure polycrystalline molybdenum subjected to mechanical polishing. Quality and microstructural characteristic of diamond produced were investigated using X-Ray diffraction, Raman Spectroscopy, Scanning and Transmission Electron Microsc...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007