Structure and Performance Analysis of Regenerative Electromagnetic Shock Absorber
نویسندگان
چکیده
This paper analyzed the structure and principle of a regenerative electromagnetic shock absorber in detail. The innovative shock absorber resembles linear generator in principle and can generate electric power through the relative reciprocating motion between coil assembly and permanent magnet assembly. At the same time, the damping can remove discomfort caused by road roughness. The regenerated electric power can be recovered through battery. Analysis of magnetic flux density of the permanent magnet array of the innovative shock absorber was performed using ANSYS software based on the structure parameters given in the paper,then the performance parameters of the shock absorber was determined . Analysis and calculation results prove the viability of this shock absorber.
منابع مشابه
Design and Analysis of Graded Honeycomb Shock Absorber for Increasing the Safety of Passengers in Armored Vehicles Exposed to Mine Explosion
Protecting armored vehicles from mine explosion can lead to the survival of thousands of people exposed to this risk. Very purpose, shock absorbers such as honeycomb structures can be applied for crashworthiness improvement. In this study, graded honeycomb structure is primarily introduced as a shock absorber, followed by the introduction of its absorbed energy and the force and acceleration ap...
متن کاملFrom Regenerative Suspension to Electromagnetic Suspension Systems
With regenerative braking technology reaching maturity manufacturers are studying other forms of energy regeneration, amongst these, regenerative suspension. Although there have been several regenerative shock absorber developments over the past decade, including linear-tubular electric motors and hydraulic actuator based systems, cost and complexity have delayed large scale deployment in serie...
متن کاملOscillation Control of Aircraft Shock Absorber Subsystem Using Intelligent Active Performance and Optimized Classical Techniques Under Sine Wave Runway Excitation (TECHNICAL NOTE)
This paper describes third aircraft model with 2 degrees of freedom. The aim of this study is to develop a mathematical model for investigation of adoptable landing gear vibration behavior and to design Proportional Integration Derivative (PID) classical techniques for control of active hydraulic nonlinear actuator. The parameters of controller and suspension system are adjusted according to be...
متن کاملAn Optimal Algorithm for Energy Recovery of Hydraulic Electromagnetic Energy-Regenerative Shock Absorber
This paper presents a new kind of shock absorber, hydraulic electromagnetic energy-regenerative shock absorber (HESA), which can recover energy from vibration of vehicles. The road excitation frequency, load resistance and damping ratio are found to greatly affect the energy recovery of HESA. Based on a quarter-car model, the optimal load resistance and damping ratio for maximizing the energy-r...
متن کاملConceptual Design of Single-Acting Oleo-Pneumatic Shock Absorber in Landing Gear with Combined Method
Landing gear is a structure that is mounted under the fuselage and helps the aircraft in takeoffs and landings. The most important duty of landing gear is the control of vibration exerted on the system through the shock absorber which is a common component to all the landing gear. Considering the importance of this issue, the necessity of investigating shock absorber with features such as high ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- JNW
دوره 5 شماره
صفحات -
تاریخ انتشار 2010