High-performance 3D printing of hydrogels by water-dispersible photoinitiator nanoparticles

نویسندگان

  • Amol A Pawar
  • Gabriel Saada
  • Ido Cooperstein
  • Liraz Larush
  • Joshua A Jackman
  • Seyed R Tabaei
  • Nam-Joon Cho
  • Shlomo Magdassi
چکیده

In the absence of water-soluble photoinitiators with high absorbance in the ultraviolet (UV)-visible range, rapid three-dimensional (3D) printing of hydrogels for tissue engineering is challenging. A new approach enabling rapid 3D printing of hydrogels in aqueous solutions is presented on the basis of UV-curable inks containing nanoparticles of highly efficient but water-insoluble photoinitiators. The extinction coefficient of the new water-dispersible nanoparticles of 2,4,6-trimethylbenzoyl-diphenylphosphine oxide (TPO) is more than 300 times larger than the best and most used commercially available water-soluble photoinitiator. The TPO nanoparticles absorb significantly in the range from 385 to 420 nm, making them suitable for use in commercially available, low-cost, light-emitting diode-based 3D printers using digital light processing. The polymerization rate at this range is very fast and enables 3D printing that otherwise is impossible to perform without adding solvents. The TPO nanoparticles were prepared by rapid conversion of volatile microemulsions into water-dispersible powder, a process that can be used for a variety of photoinitiators. Such water-dispersible photoinitiator nanoparticles open many opportunities to enable rapid 3D printing of structures prepared in aqueous solutions while bringing environmental advantages by using low-energy curing systems and avoiding the need for solvents.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Highly interconnected porous nanocomposite scaffolds -manufactured by table-top 3D printing

With the development and accessibility of commercial three-dimensional (3D) printers, the capability of manufacturing highly interconnected and porous 3D scaffolds holds signifi cant interest and great potential in the biomedical fi eld. Unfortunately, current table-top printing modalities are largely predicated on their more expensive commercial counterparts leveraging proven printing material...

متن کامل

Improving organic tandem solar cells based on water-processed nanoparticles by quantitative 3D nanoimaging.

Organic solar cells have great potential for upscaling due to roll-to-roll processing and a low energy payback time, making them an attractive sustainable energy source for the future. Active layers coated with water-dispersible Landfester particles enable greater control of the layer formation and easier access to the printing industry, which has reduced the use of organic solvents since the 1...

متن کامل

Controlling uniformity of photopolymerized microscopic hydrogels.

This paper studies hydrogels created by photopolymerization with a uniform beam of light. Under some conditions the density profiles of the resulting hydrogels were uniform cylinders, mirroring the illumination profiles. However, under other conditions, gels with hollow cylindrical shapes were formed. We studied the photopolymerization of poly-N-isopropylacrylamide (pNIPAAM), a hydrogel that ha...

متن کامل

Aqueous compatible boron nitride nanosheets for high-performance hydrogels.

Hexagonal boron nitride nanosheets (BNNSs) possess ultimate thermal and chemical stabilities and mechanical strengths. However, the unmodified BNNSs are hydrophobic and insoluble in water, which hinders their use in many technological areas requiring aqueous compatibility. In this work, h-BN was treated with molten citric acid to produce aqueous dispersible boron nitride sheets (ca-BNNSs). The ...

متن کامل

Methods for photocrosslinking alginate hydrogel scaffolds with high cell viability.

Methods for seeding high-viability (>85%) three-dimensional (3D) alginate-chondrocyte hydrogel scaffolds are presented that employ photocrosslinking of methacrylate-modified alginate with the photoinitiator VA-086. Comparison with results from several other photoinitiators, including Irgacure 2959, highlights the role of solvent, ultraviolet exposure, and photoinitiator cytotoxicity on process ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 2  شماره 

صفحات  -

تاریخ انتشار 2016