Growth of hexagonal GaN thin films on Si(1 1 1) with cubic SiC buffer layers
نویسندگان
چکیده
The growth of GaN films on silicon or sapphire substrates has not been straightforward due to their large mismatch ('13%). SiC is structurally the closest material to GaN (especially cubic form) and has a small lattice mismatch (3.5%) between SiC and GaN, and therefore can be useful as the substrate for GaN. Single-crystal wafers of cubic SiC and GaN, however, are hard to obtain and have not been produced commercially yet. Therefore, a thin layer of cubic SiC on substrates such as Si and oxide single crystals might solve this problem and will be one of a suitable buffer layers for the cubic GaN film growth. Epitaxial cubic SiC buffer layers were grown on either carbonized or uncarbonized Si(1 1 1) substrates as low as temperature of 830°C using a supersonic molecular jet of t-butyldimethylsilane, (CH 3 ) 3 CSiH(CH 3 ) 2 , and the polycrystalline hexagonal GaN thin films were subsequently deposited on them at 600°C using a MOMBE system. The buffer layers and the GaN films were characterized by AES, XRD, FTIR, ellipsometry, and X-ray phi(/)-scan measurements. The growth temperature of t-butyldimethylsilane was much lower than conventional CVD growth temperatures and this is the first report to obtain epitaxial cubic SiC films on Si from t-butyldimethylsilane and new attempt to grow h-GaN thin films on cubic SiC buffer layers. ( 1998 Published by Elsevier Science B.V. All rights
منابع مشابه
CUBIC GaN HETEROEPITAXY ON THIN-SiC-COVERED Si(001)
We have investigated the growth conditions of cubic GaN (β-GaN) layers on very thin SiC-covered Si(001) by using gas-source molecular beam epitaxy as functions of SiC layer thickness, Ga-cell temperature and substrate temperature. Under the present SiC formation conditions on Si substrates by carbonization using C2H2 gas, the SiC layers with the thickness between 2.5 and 4 nm result in the epit...
متن کامل3C-SiC Films on Si for MEMS Applications: Mechanical Properties
Single crystal 3C-SiC films were grown on (100) and (111) Si substrate orientations in order to study the resulting mechanical properties of this material. In addition, poly-crystalline 3CSiC was also grown on (100)Si so that a comparison with monocrystaline 3C-SiC, also grown on (100)Si, could be made. The mechanical properties of single crystal and polycrystalline 3C-SiC films grown on Si sub...
متن کاملMOCVD growth of non-epitaxial and epitaxial ZnS thin films
Thin films of ZnS have been deposited by MOCVD on both BaTa206/ITO/glass and Si substrates. Diethylzinc (DEZn) and H2S are used for deposition on substrates heated to the 250-400°C temperature range. The microstructure and properties of ZnS films were studied by X-ray diffractometry (XRD), ultraviolet/visible spectrophotometry (UVS) and scanning electron microscopy (SEM). Films prepared on BaTa...
متن کاملA Study of ZnO Buffer Layer Effect on Physical Properties of ITO Thin Films Deposited on Different Substrates
The improvement of the physical properties of Indium Tin Oxide (ITO) layers is quite advantageous in photovoltaic applications. In this study the ITO film is deposited by RF sputtering onto p-type crystalline silicon (c-Si) with (100) orientation, multicrystalline silicon (mc-Si), and glass substrates coated with ZnO and annealed in vacuum furnace at 400°C. Electrical, optical, structural a...
متن کاملDifferent void shapes in Si at the SiC thin film / Si ( 111 ) substrate interface
The shape of interfacial voids formed in the epitaxial SiC/Si(111) heterosystem just underneath the SiC film has been investigated using optical microscopy and transmission electron microscopy (TEM). SiC films are grown on Si(111) substrates at two different substrate temperatures (specimen type 1 at 850°C, specimen type 2 at 1050°C) using solid-source molecular-beam epitaxy (MBE). At 850°C sub...
متن کامل