Propulsion on a superhydrophobic ratchet
نویسندگان
چکیده
Liquids in the Leidenfrost state were shown by Linke to self-propel if placed on ratchets. The vapour flow below the liquid rectified by the asymmetric teeth entrains levitating drops by viscosity. This effect is observed above the Leidenfrost temperature of the substrate, typically 200°C for water. Here we show that coating ratchets with super-hydrophobic microtextures extends quick self-propulsion down to a substrate temperature of 100°C, which exploits the persistence of Leidenfrost state with such coatings. Surprisingly, propulsion is even observed below 100°C, implying that levitation is not necessary to induce the motion. Finally, we model the drop velocity in this novel "cold regime" of self-propulsion.
منابع مشابه
Transport of underdamped active particles in ratchet potentials.
We study the rectified transport of underdamped active noninteracting particles in an asymmetric periodic potential. It is found that the ratchet effect of active noninteracting particles occurs in a single direction (along the easy direction of the substrate asymmetry) in the overdamped limit. However, when the inertia is considered, it is possible to observe reversals of the ratchet effect, w...
متن کاملRatchet transport powered by chiral active particles
We numerically investigate the ratchet transport of mixtures of active and passive particles in a transversal asymmetric channel. A big passive particle is immersed in a 'sea' of active particles. Due to the chirality of active particles, the longitudinal directed transport is induced by the transversal asymmetry. For the active particles, the chirality completely determines the direction of th...
متن کاملImproving the natural convective heat transfer of a rectangular heatsink using superhydrophobic walls: A numerical approach
The effect of utilizing superhydrophobic walls on improving the convective heat transfer in a rectangular heatsink has been studied numerically in this paper. The vertical walls were kept at isothermal hot-and-cold temperatures and horizontal walls were insulated. The boundary condition on the walls was: no-slip for regular, and slip (with slip length of 500 µm) for superhydrophobic walls. By c...
متن کاملSuperhydrophobic clothes: preparation and characterization
A superhydrophobic surface is coated on the surface of a cloth by MTCS (methyltrichlorosilane) nanoparticles and then, it is modified by SiO2–m–FTCS (1H,1H,2H,2H-Perfluorododecyltrichlorosilane) nanoparticles. This surface is characterized by SEM(scanning electron microscopy), and FT-IR (Fourier transform-infrared microscopy) and also its contact angle is investigated in various conditions and ...
متن کاملSuperhydrophobic clothes: preparation and characterization
A superhydrophobic surface is coated on the surface of a cloth by MTCS (methyltrichlorosilane) nanoparticles and then, it is modified by SiO2–m–FTCS (1H,1H,2H,2H-Perfluorododecyltrichlorosilane) nanoparticles. This surface is characterized by SEM(scanning electron microscopy), and FT-IR (Fourier transform-infrared microscopy) and also its contact angle is investigated in various conditions and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 4 شماره
صفحات -
تاریخ انتشار 2014