Influence of an Accurate Trimming operation on Springback
نویسنده
چکیده
When a sheet metal forming operation, such as deep drawing, is followed by a trimming operation the numerical springback is influenced by various physical parameters and numerical factors. Two techniques of taking into the account the stress state change due to cutting in the FE plate model are discussed in the present paper. The first technique concentrates on the effect of the element mesh cutting and involves an accurate in-plane mapping of the state variables preceded by a mesh adaptivity procedure that confirms the trimline. The second technique incorporates the effects of the 2D cutting process performed with continuum elements in the deep drawing shell element model, by means of a mapping strategy. The influence of these techniques of stress state updating after trimming on the amount of the numerical springback of the whole product is the major question to be answered in this article.
منابع مشابه
Project MC1.02121 Springback: Improvement of its Predictability to Meet Industrial Requirements Numerical Trimming Operation with Respect to Springback
متن کامل
U-Bending Analysis with an Emphasis on Influence of Hardening Models
In this paper the effect of different hardening models in simulating the U-bending process for AA5754-O and DP-Steel, taking a benchmark of NUMISHEET 93 2-D draw bending, has been discussed. The hardening models considered in simulations are: isotropic hardening, pure (linear) kinematic hardening and combined (nonlinear kinematic) hardening. The influence of hardening models on predicting sprin...
متن کاملFactors and Causes That Influence the Springback Intensity in the Case of Cylindrical and Conical Draw Parts Made from Steel Sheets
ABSTRACT The cold plastic forming of metal sheets generates a undesired phenomenon known as springback. Springback occurs after the tools were removed and the forming forces become equal to zero – and leads to a shape of the final part different from the theoretical ones. The study and analysis of the factors that influence this phenomenon is useful for the accurate design of the forming proces...
متن کاملSpringback is very important factor to influence quality of sheet metal forming. Accurate prediction and controlling of springback is essential for the design of tools for sheet metal forming, many parameters
متن کامل
An Experimental Study of Springback of Bent Sheet Metal Parts
Bending is the uniform straining of material around a straight axis and is used commonly in various sheet metal industrial products. Since all materials have a finite modulus of elasticity, plastic deformation is followed by some elastic recovery when the load is removed. In bending processes this phenomenon is called springback. Springback occurs not only in flat sheets or plate, but also in b...
متن کامل