Modified deposition process of electron transport layer for efficient inverted planar perovskite solar cells.
نویسندگان
چکیده
A highly-efficient inverted heterojunction perovskite solar cell was prepared. A homogeneous and compact perovskite (CH3NH3PbI3) layer was prepared via a two-step solution deposition method, and subsequently a double-layer PCBM film was deposited by a sequential spin-coating/vapor deposition process as the electron transport layer. The optimised device could achieve a 12.2% (average 11.09%) efficiency.
منابع مشابه
Planar perovskite solar cells using fullerene C70 as electron selective transport layer
Owing amongst other to its high electron mobility, fullerene C70, has been widely used as an electron transporting layer in organic solar cells. In this research, we report the use of C70 thin films as electron transport layers of planar perovskite solar cells (PSCs) using a conventional device structure. The thickness of the C70 layer has been optimized to achieve the best efficiency of 12%. I...
متن کاملNovel Solvent-free Perovskite Deposition in Fabrication of Normal and Inverted Architectures of Perovskite Solar Cells
We introduced a new approach to deposit perovskite layer with no need for dissolving perovskite precursors. Deposition of Solution-free perovskite (SFP) layer is a key method for deposition of perovskite layer on the hole or electron transport layers that are strongly sensitive to perovskite precursors. Using deposition of SFP layer in the perovskite solar cells would extend possibility of usin...
متن کاملA nano-grid structure made of perovskite SrTiO3 nanowires for efficient electron transport layers in inverted polymer solar cells.
A nano-grid structure of perovskite SrTiO3 NWs is developed for a novel electron transport layer in inverted polymer solar cells. Due to the excellent charge transporting properties of the SrTiO3 nano-grid structure, the device employing this nanostructure showed ∼32% enhanced photovoltaic performance, compared to the solar cell using a TiO2 thin film.
متن کاملElectrodeposition of SnO2 on FTO and its Application in Planar Heterojunction Perovskite Solar Cells as an Electron Transport Layer
We report the performance of perovskite solar cells (PSCs) with an electron transport layer (ETL) consisting of a SnO2 thin film obtained by electrochemical deposition. The surface morphology and thickness of the electrodeposited SnO2 films were closely related to electrochemical process conditions, i.e., the applied voltage, bath temperature, and deposition time. We investigated the performanc...
متن کاملHybrid UV-Ozone-Treated rGO-PEDOT:PSS as an Efficient Hole Transport Material in Inverted Planar Perovskite Solar Cells
Inverted planar perovskite solar cells (PSCs), which are regarded as promising devices for new generation of photovoltaic systems, show many advantages, such as low-temperature film formation, low-cost fabrication, and smaller hysteresis compared with those of traditional n-i-p PSCs. As an important carrier transport layer in PSCs, the hole transport layer (HTL) considerably affects the device ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 51 43 شماره
صفحات -
تاریخ انتشار 2015